9-12V Wireless Irrigation Controller Wire Solution Sub Decode Board
128 Station Decode Board
Feature under “Moisture control" mode:
One key push-hold to setup Dry control level, and one key push-hold
to setup wet control levels.
Then the system will keep the soil moisture level within the set up
range.
User can adjust wet/dry control levels on the screen.
Set maximum irrigation duration to prevent flooding by broken pipe.
Moisture sensor could be buried shallow or deep into the soil.
The LCD will in sequence show "Dry control %, Current %, Wet
control %, Max (Duration)".
Feature under "Timer control" mode:
Uses the moisture sensor as rain sensor to prevent irrigation in
the rain.
Set any sensitivity of the rain sensor as desired.
User can set up any length of irrigation duration as desired.
Set maximum moisture % of the rain sensor to prevent flooding by
broken pipe.
The LCD will in sequence show "Interval, Duration, Max %(of rain
sensor)".
Good Points:
1. Reliable and very easy to use.
2.Solar power supply green power and maintenance free. Battery
supplys low cost power.
3.Applies to any soil type, accurately keeps soil moisture in the
set range, optimizes irrigation and save water.
4.Using outdoor material, ASA plastic, protected from moisture and
ultraviolet rays.
5.This system is good for your backyard organic vegetables, fruit
trees, green lawn and vertical landscape.
6. Valve Flow specification: 0.02Mpa≥2.0L/Min, 0.2Mpa≥9.5L/Min
0.5Mpa≥23L/Min, Max pressure: 1.0Mpa.
Optimize irrigation, save water, maintenance free and protect the
environment!