5W Wireless Radio Module 144.390MHz APRS Serial Wireless Data Transmission 10km

Brand Name:Lensen
Model Number:LS-V5000
Minimum Order Quantity:2pcs
Delivery Time:2-6days
Payment Terms:T/T, Western Union
Place of Origin:China
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 701, Yongchang Building, Xicheng Industrial Zone, Xixiang, Bao'an District, Shenzhen, China 518126
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

LS-V5000 radio module adopts double phase-lock loop, double VCO structure and high stability TXCO. With advanced arithmetic fault-rectify system, it has high stability and reliability. This module is usually used for industry control, water conservancy, rescue at sea, oil field management, wireless alarm and so on. Moreover, we can extend its functions and ODM products for you according to your specific application.


Features:


Specifications:

Double phase-lock loop, double VCO structure, high stability

Carrier frequency: VHF/UHF selectable

Air data rate: 1200/2400bps now

Interface: TTL/RS-232/RS-485 selectable

Modulation: FSK/MSK

Frequency stability: ±2.5ppm

Channel spacing: 25KHz

Antenna impedance: 50 ohm

Temperature: -30~+70C

Size: 85x58x16mm (without radiator)

Transmission distance can reach 10Km LOS

Pin No.Signal NameDefinitionDescriptionRemarks
Power1VCCDC12V±10%Maximum transmission current: 1.5A
2GNDGrounding of power supply
Signal base1GNDGrounding of power signal
2A(TXD)Data receivingTTL TX / RS232 TX / RS485-AChoose one
3B(RXD)Data transmittingTTL RX / RS232 RX / RS485-B
4NC
5DGNDGrounding of Signal
6PTTAudio transmitting control
7MIC INMicrophone input control
8SPEAKER OUTSpeaker output control
9TESTFactory testing

Receiving parameter:

Receiving sensibility: ≤-119dBm (more than 12dB SINAD)

Adjacent channel selectivity: ≥65dB

Intermodulation rejection: ≥65dB

Clutter and images rejection: ≥70dB


Transmiting parameter:

RF power: 5W

Frequency deviation: ≥ 5.0kHz

Adjacent channel power: ≥70dB

Transmitting current: ≤1.5A


Application of LS-V5000:

APRS, SCADA

Wireless alarm and security systems;

Wireless voice transmission system, wireless pagers

wireless monitoring and process control;

Wireless data transmission, automatic data collection system;

Wireless conference voting system;

Wireless POS, PDA wireless smart terminal;

Electronic bus station and intelligent traffic;

Wireless electronic display screen, LED display

RS232/RS485 to wireless;


How to use the LS-V5000 data radio module

LS-V5000 provides RS-232, RS-485 or TTL level interface port for direct connection with PC, RS485 devices, micro-controller and other UART equipment.


Power supply

LS-V5000 works in supply voltage 12V DC. By using better ripple factor, LS-V5000 transceivers can also share power supply with other equipments. If possible, a voltage-stabilizing chip with 12V voltage is more recommended as the only power supply than switch power supply. But if only switch power supply available, the jam by switch pulse to the transceiver should be avoided. In addition, the reliable grounding must be used if there is other devices in this system. In case of failing to connect with the ground, it can form its own grounding but must be absolutely separated from the municipal electric supply.


Pin Definition

Pin No.Signal NameDefinitionDescriptionRemarks
Power1GND

Grounding of power supply


2VCCDC12V±10%Maximum transmission current: 1.5A
Signal base1RxD (TTL)Data receiving of TTL
2A(TXD)Data receivingRS232 TX / RS485-AChoose one
3B(RXD)Data transmittingRS232 RX / RS485-B
4

TxD

(TTL)

Data Transmitting of TTL
5DGNDGrounding of Signal
6PTTAudio transmitting control
7MIC INMicrophone input control
8SPEAKER OUTSpeaker output control
9TESTFactory testing

China 5W Wireless Radio Module 144.390MHz APRS Serial Wireless Data Transmission 10km supplier

5W Wireless Radio Module 144.390MHz APRS Serial Wireless Data Transmission 10km

Inquiry Cart 0