Digital 30l Ultrasonic Bath Cleaner Removing Soldering From Pcb Board

30L Digital Ultrasonic Bath Cleaner Removing Soldering From The PCB Board

How Ultrasonic Bath Cleaner Works For You?

Ultrasonic cleaners are used in a wide range of applications to remove virtually any soil or contamination by using the power of cavitation action. This is the term used to describe the implosion of billions of minute bubbles contacting Nook Color components and surfaces. The bubbles are created by generator-powered ultrasonic transducers bonded to an ultrasonic cleaning tank and typically operate at an ultrasonic frequency of 37 to 42 kHz (37,000 to 42,000 cycles per second).

When the bubbles implode contaminants are quickly and safely removed from PCB surfaces without damaging delicate parts. So tiny are the bubbles that they penetrate minute cracks, crevices and blind holes that might lodge dried residue, dust and dirt particles. The ultrasonic PCB cleaning system will complete the job in as little as 10 to 15 minutes. And it will do it in an environmentally friendly manner because the ultrasonic circuit board cleaning solution formula is a biodegradable concentrate that minimizes disposal problems.

Data Sheet Of Z-S10:

Customer's Feedback:

Cleaning Steps Of Ultrasonic Cleaning:

1. Turn the unit on and activate the degas mode to thoroughly mix the solution and drive off trapped air. (This must be done each time you prepare a new bath of solution).

2. Set the thermostat to the recommended formulation temperature.

3. Wear protective gloves and use tweezers to place the parts in the bath.

4. Set the timer to permanently on* and place the lid on the tank.

5. At the end of the cycle remove and inspect the parts. Again: never reach into an operating ultrasonic bath. Wear gloves and/or use tweezers to handle the parts.

6. If satisfied thoroughly rinse the parts to remove all traces of solution.

The solution must be replaced when cleaning efficiency drops. Drain and dispose of it according to local regulations. Follow user manual instructions to clean the tank before filling it with fresh solution.

Contact the ultrasonic cleaning experts at Whale cleen sonic for information on selecting the equipment and cleaning chemistry best matching your operations. We can also provide suggestions for ultrasonic cleaners used in electronic industry.

MORE OPERATING TIPS

Any contaminants that rise to the surface of the bath should be skimmed off and disposed of properly. When the circuit board cleaning solution becomes discolored or cleaning takes longer it is time to replace it. Drain the tank and dispose of the spent solution according to local regulations. Take the time to remove any material that settled to the bottom of the tank. Clean the tank using a cleaning process recommended by the manufacturer.

FAQ:

1. Can I Put Metal In?

Generally, yes. However, a notable exception is tungsten. This metal should not be put in ultrasonic cleaners because the cleaning process can damage it.

Whatever metals your jewelry is composed of, make sure to ask your jeweler whether it is safe to clean it with an ultrasonic cleaner as you never know what metals or alloys make up your jewelry.

2. What Can I Clean Using Ultrasonic Cleaners?

Metals such as gold and platinum are safe to clean with ultrasonic devices.

Hard natural gemstones can also be put into an ultrasonic cleaner provided that they have few inclusions and have not been treated with heat or chemicals.

Anyway, be sure to ask the jeweler at the time you purchase any piece of jewelry whether it can be cleaned with an ultrasonic cleaner.

There might be unsuitable alloys or gems, or some gemstones may have been treated, becoming more vulnerable in the process.

We, Guangdong Blue Whale Utrasonic Cleaning Equipment Co., Limited is located in both Dong Guan City and Shen Zhen City, Guang Dong Province. With the trust and support of our customers, we have more than 18 years experience in this filed, Then we want to do some difference from the market, not only selling but also helping.

For distributors, we provide superb equipements and good solutions(include 12 cleaning serise) for your customer, free training and free aftersales to make long term and win-win result.

For terminal clients, we support u best quality machine and good service and cleaning solution till u make full use of the equipments.

We have strong customer feedback in many industries like Automotive, Molds, Aerospace, Firearms and etc.

We are here for you at 24/7. Please do not hesitate to contact us if you are interested in our products.