Mini Servo Motor Encoder ABZUVW Phase OIH48 - 1024P6L65v Encoder K48
Brand Name:HENGXIANG
Certification:CE,ISO9001
Model Number:K48-J servo encoder
Minimum Order Quantity:1 piece to start order
Delivery Time:1-3 working days for sample, 7 -10 days for mass production
Payment Terms:Western Union, MoneyGram, T/T, D/P, D/A, L/C
Contact Now
Add to Cart
Active Member
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Servo motor special encoder ABZUVW phase OIH48-1024P6L65v encoder K48
Our advantage
- More than 20 years experienced engineers
- Professional working team
- Over 18 years encoder production experience
- High quality standard
- Quick Response time
- Utility Model Patent Certificate
- Own brand and unique brand
- CE certification for all models
- Prompt delivery date
- 100% full inspection before shipment
Part Number of K48 Incremental Encoder
K48-J12C1000/4Q6
K48-J12E1000/6Q8
K48-J12C2000/4Q10
K48-J12C25000/4Q10
K48-J12C1000/6B6
K48-J12E2000/8B8
K48-J12E4096/8B10
K48-J12E4096/6B12
K48-J12C2500/16Q10
K48 Encoder Product introduction
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 48mm |
| Thickness | 34mm |
| Installation dimension | 40mm(spring plate 48T40) |
| Hollow shaft type | through hole or blind hole |
| Hollow shaft diameter | 6mm,8mm,10mm,12mm |
| Resolution | 50;60;100;200;250;256;300;360;400;450;500;512;600;1000; 1024;1200;2000;2048;2500; 4096;5000;8192 |
| 1000/4;1000/6;1000/8;1024/4;1024/6；1024/8；2000/4； 2000/6；2000/8；2048/4；2048/6;2048/8；2500/4；2500/6；2500/8;4096/4;4096/6;4096/8;5000/4;5000/6;5000/8;8192/4; 8192/6;8192/8 | |
| Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
| Supply voltage | DC5V ; DC8--30V |
| Outlet type | Cable out from side |
| Output mode | NPN/PNP(Open Collector Output) |
| Voltage output | |
| Push-pull output | |
| line drive (26LS31) TTL | |
| line drive(DC8-30V) HTL | |
| TTL(DC5V) phase ABZ are back of phase UVW | |
| Protection grade | IP40 |
| Cable length | 500mm |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| Insulation strength | AC500V 60s |
Technical Theory of encoder/
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
The differential outputs have the highest frequency response capability and the best noise immunity. To ensure this the receiver should also be a differential.
Replacement of Older Output Drivers
Mini Servo Motor Encoder ABZUVW Phase OIH48 - 1024P6L65v Encoder K48
Inquiry Cart
0