Portable Dual Diaphragm Pump 1/2" Air Operated Double Diaphragm Pump

Portable Dual Diaphragm Pump 1/2" Air Operated Double Diaphragm Pump

Portable Air Powered Dual Diaphragm Pump Non Leakage For Printing

Specifications

Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium

Air diaphragm pump(also know as a Membrane pump, air operated double diaphragm pump(AOOD) or pneumatic diaphragm pump)that uses a combination of the reciprocating action of a rubber,thermoplastic or diaphragm and suitable valves either side of the diaphragm (check valve,butterfly valves,flap valves,or any other form of shut-off valves) to pump a fluid.

Technical specification of 1/2 "plastic pump

Product Name: 1/2 "plastic pneumatic diaphragm pump

Scale: 1:1

Larger flow: 45l/min

Displacement per cycle: 2.54l

Air inlet: 1/2-14 n.p.t.f-1

Fluid inlet: 1/2 "a.n.s.i BSP

Fluid outlet: 1/2 "a.n.s.i BSP

Greater working pressure: 0.69mpa

Allowable larger particle diameter: 4mm

Weight: 2.8kg

Larger dry suction height: 4.M

Noise level: MPa c.p.m dB (a) 60

A 1 5 X X - X X X - X (model selection)

Form of pipe mouth:A-BSP B-NPT(F) C-Flange

Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene

Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal

Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel

Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon Steel P/K –Polypropylene/Kynoar

Maximum Applied Temperature Limits (diaphragm / ball / seal material)

Acetal ···············································40°- 150°F (4.4- 65.5°C)

Santoprene·········································-40°- 225°F (-40°- 107.2°C) ·················································40°- 220°F (4.4°- 104°C) Nitrile···················································10°- 180°F (-12°- 82°C) Viton······················································-40°- 350°F (-40°-176.6°C) Hytrel·····················································-20°-150°F (-12°- 93°C) Kynar······················································10°-200°F (-28.9°- 65.5°C) Polypropylene···········································32°- 175°F (0-79.4°C)

Product Usage

1. Pump peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate, etc.

2. Pumping paint, gum, and pigment.

3, adhesives and glue, all types can be pumped.

4, a variety of tiles, porcelain, bricks and pottery glaze.

5. After the oil well is drilled, pump the sediment and grout.

6. Pump various emulsions and fillers.

7. Pumping all kinds of age.

8. Use the pump as the tanker, and the barge clears the tank to absorb the age.

9, hops and fermented powder slurry, syrup, sugar dense.

10. Pumping water from mines, tunnels, tunnels, beneficiation, and slag. Pumping cement grout and mortar.

11, a variety of rubber pulp.

12. Various abrasives, corrosives, petroleum and mud, cleaning grease and general containers.

13, a variety of highly toxic, flammable, volatile liquids.

14, a variety of strong acid, alkali, strong corrosive liquid.

15, a variety of high temperature liquids can withstand 150 ° C.

16. As a pre-stage pressure supply device for various solid-liquid separation devices

1” Flow diagram