Add to Cart
Powerful Chemical Diaphragm Pump / Petrochemistry Low Flow
Diaphragm Pump
Chemical Diaphragm Pump not only can exhaust the flow liquid , but
also can convey some uneasy flowed medium.
Chemical Diaphragm Pump Parameters
Item | Description | Unit | Reference Figure |
1 | Maximum air inlet pressure | Mpa | 0.83 |
2 | Maximum flow rate | L/Min | 192 |
3 | Maximum lift | M | 70 |
4 | Maximum outlet pressure | Mpa | 0.83 |
5 | Maximum particle size | mm | 3 |
6 | Weight | kg | 12.3 |
7 | Noise level | db | <70 |
Chemical Diaphragm Pump Main Advantages
1, Due to the use of air power, the flow automatically changed
according to export resistance. Which is suitable for high
viscosity fluid.
2, In inflammable and explosive environment, the pump is reliable
and low cost, won't produce spark and not overheat,
3, The pump volume is small, easy to move, no foundation needed,
convenient installation and economy. Can be used as mobile
conveying pump.
4, Where there are dangers, corrosive materials processing,
diaphragm pump can be separated completely with outside.
5, The pump shearing force is low, physical effect to medium is
small, can be used for conveying unstable chemistry fluid.
Air Diaphragm Pump Application
It is widely applied in waste water treatment, chemical industry,
petrochemical
industry, painting, ceramics, environmental protection, printing
and dyeing, etc. to deal with all kinds of
corrosive, volatile, flammable, poisonous fluids with particles and
high viscosity.
A 2 5 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon
Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal material)
Acetal ···············································40°- 150°F
(4.4- 65.5°C)
Santoprene········································-40°- 225°F
(-40°- 107.2°C)
················································40°- 220°F (4.4°-
104°C) Nitrile················································10°-
180°F (-12°- 82°C)
Viton·················································-40°- 350°F
(-40°-176.6°C)
Hytrel·················································-20°-150°F
(-12°- 93°C)
Kynar·················································10°-200°F
(-28.9°- 65.5°C)
Polypropylene······································32°- 175°F
(0-79.4°C)
1” Flow diagram
Installation dimensions: