Product:IS215ACLEH1A GE EX2100 Excitation Control Board Application Control Layer Module

I/O devices on the equipment can be mounted up to 300 meters (984 feet) from the termination boards, and the termination boards must be within 15 m (49.2’) from their corresponding I/O cards. Normally, the termination boards are mounted in vertical columns in termination cabinets with pre-assigned cable lengths and routing to minimize exposure to emi-rfi for noise sensitive signals such as speed inputs and servo loops.

In addition to general purpose I/O, the Mark VI has a large variety of cards that are designed for direct interface to unique sensors and actuators. This reduces or eliminates a substantial amount of interposing instrumentation in many applications. As a result, many potential single-point failures are eliminated in the most critical area for improved running reliability and reduced long-term maintenance. Direct interface to the sensors and actuators also enables the diagnostics to directly interrogate the devices on the equipment for maximum effectiveness. This data is used to analyze device and system performance. A subtle benefit of this design is that spare-parts inventories are reduced by eliminating peripheral instrumentation. The VTUR card is designed to integrate several of the unique sensor interfaces used in turbine control systems on a single card. In some applications, it works in conjunction with the I/O interface in the Backup Protection Module described below

The IS215ACLEH1A module excels in converting digital control signals into analog current outputs. It utilizes advanced conversion techniques to accurately translate digital control values into corresponding analog current signals, facilitating seamless integration with analog control systems and devices.

The module offers a flexible current output range, allowing for customization based on specific operational requirements. It can generate analog current signals within a specified range, accommodating various control systems and devices with different current input requirements.

The module supports a wide operating voltage range, accommodating different voltage levels required by various control systems and devices. It can adapt to different input and output voltage levels, ensuring compatibility and flexibility in diverse industrial environments.

We supply :

BENTLY EPRO ALL SERIES OF PRODUCTS SPAR PARTS PROBE Proximitor
PLC : AB,ABB,GE,Schneider
DCS : ABB,Siemens MOORE,Foxboro,Westinghouse,YOKOGAWA
ESD : Triconex,HIMA,Bently Nevada,ICS
Excitation cards : ABB,GE

Hot sells Products:

Photos:

We are the supplier for industrial automation spare parts.We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts, we have established the relationship with famouse PLC DCS product maintenance service providers in the world.

Our products are widely used in CNC machinery and metallurgy, oil and gas, petrochemical, chemical, paper printing, textile printing and dyeing, machinery, electronics manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment / environmental protection, municipal engineering, Heating, energy, transmission and distribution industries.

We have large of inventory for our company's advantage products

All of kinds of DCS、PLC parts：

Germany KONRAD:

EC6423 / EC6424 / EC6426 / EC6430 / EC6432 / EC6433 series of eddy current sensors,

EC20382 displacement sensor, MMS7000 monitoring and protection system.

Bently Nevada:

3500 system / 3300 system monitoring and protection system, the front eddy current sensor probe

Germany EPRO

PR6422 / PR6423 / PR6424 / PR6426 eddy current sensor, PR9268 series of electric absolute vibration sensor,MMS6000 system.

ENTEK:

Eddy current sensor probe, vibration monitoring table dual channel shaft vibration watch table C6652.

VIBRO-METER:

Vibration sensor, acceleration sensor, eddy current sensor, monitoring system module gateway communication module.

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Schneider Modicon:

Quantum 140 series: CPU processor module, communication module, analog input and output modules, digital input and output modules.

GE:

IC63 / IC695 / IC697 / IC698 / IC200 / IC660 / IC670 and other CPU modules, communication modules, analog digital modules.

EX2100, EX2000 Excitation system card IS200 series, DS200 series.

Invensys Foxboro:

I / A Series system, FBM (field input / output module) sequence control, trapezoidal logic control, accident recall processing, number

Analog conversion, input / output signal processing, data communication and processing.

Invensys Triconex:

Redundant fault-tolerant control system, and the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture.

Westinghouse:

OVATION system, WDPF system, WEStation system spare parts.

Honeywell:

Alcont, Experion LS, Experion PKS, Experion HS, Plant Scape,

TDC 2000, TDC3000, TPS, security systems.

ABB:

AC800M series module, industrial robot spare parts DSQC series, Bailey INFI 90,800xA, Advant OCS withMaster Software, Advant OCS with MOD 300 software, Freelance - Distributed control system for the process industry

Symphony Melody, Satt OCS, Symphony DCI System Six, Harmony / INFI 90, security systems, etc.

Emerson:

DeltaV systems, dual-channel redundant security systems, redundant controllers, power modules, and

I / O unit, Analog AI module, Analog AO module.

Siemens:

Siemens MOORE, 6ES5 series, 6GK series, 6DD series, 6AR series.

Yokogawa:

CS3000 system CPU controller module, analog module.

Woodward:

SPC valve position controller, 505 / 505E (9907-162,9907-164,9907-165,9907-167) digital controller,

2301A controller 9905 series, 2301D-ST series