Ceramic Liquid Distributor Packed Column With High Separation Efficiency

Ceramic Liquid Distributor Packed Column With High Separation Efficiency

Ceramic Structured Packings, a very thin liquid film can be formed on the ceramic surface. Turbulence of the liquid film and the oblique winding gas channel can promote vapor instead of stopping it, therefore separation efficiency of the packing is equal to that of metal corrugated-sheet packing. Surface structure of the ceramic packing has good wetting ability, which promotes liquid flow and minimizes liquid holdup, as a result, the opportunity of superheating, polymerization and coking reduces.

Excellent Performance:
1. High capacity. New tower design may reduce diameter, while revamping old towers may increase capacity significantly.
2. High separation efficiency owing to much larger specific surface area compared with random packing.
3. Low pressure drop, which leads to reduce energy consumption largely.
4. Large flexibility, and scale effect is not obvious.
5. Applicable to all tower diameters.
6. Strong resistance to corrosion of acid and alkali, especially to H2S, naphthenic acid and Cl-.

Chemical component:

Technical data:

Detailed description of each type of product:

1. 700Y,500Y

The filler has low resistance, high efficiency, large separation capacity, and can replace other fillers or partial plate towers under certain conditions.

Product Features:
a. Large specific surface area and large porosity;

b. The gas phase passage has a small inclination angle, regularity and pressure reduction;
c. Radial diffusion is good and gas contact is sufficient.

Applicable occasions:
500Y (X): vacuum rectification which is heat sensitive and difficult to separate, especially vacuum distillation with a pressure less than 7 KPa, atmospheric distillation.
700Y (X): separation of isotopic mixtures, isomeric mixtures.

2. 450Y,450X

It is used for precision fractionation with high requirements on the mass transfer efficiency of the tower. It is especially suitable for chemical production processes such as acetic acid, methanol and styrene, and separation of high-purity fine chemical products. The adaptation conditions are roughly as follows:

Gas phase load factor, F=1.5~3(m/s)[Kg.m3]1/2
Minimum liquid load, L (spray density) ≥ 2m3 / m2.h

3. 350Y,300Y,250Y

The product combines the two main properties of pressure drop and efficiency in the mass transfer process. Especially suitable for atmospheric pressure in the refining process.

Application:
1.Separation of chloroacetic acid / dichloroacetic acid / acetic acid / acetic anhydride between room temperature and 1400℃
2.Separation of aromatic chloride, lipoid, hydrocarbon and other highly thermosensitive systems and isomeric compound in vacuum under 1 mbar,.
3.Regeneration of organic solvent contaminated by hydrochloric acid/ sulfuric acid/ nitric acid/ hydrogen phosphide / hydrogen bromide / bromine, etc.

Y&G International Trading Co., Ltd was established in 2003, it serves in the oil refinery, petrochemical industry, chemical industry, heat ex-changer industry, anti-corrosion engineering and environmental protection etc.. Our main products include pipe, tubes, plate, bar, U bend tube, finned tube and pipe fittings made of Carbon Steel, Stainless Steel, Copper & Copper Alloy, Titanium, Inconel & Incoloy, Aluminium Alloy and so on.

Since 2003, Y&G has successfully achieved this by offering our clients a range of high quality, environment friendly products from a diverse list of reputable, international principals, that sell by their own merit. By maintaining close contacts with our clients and providing dedicated technical support in time, we continue to meet and at times, exceed our clients' expectations. With an objective to provide piping material and tower packing to the oil and petrochemical industries, we strictly carry out a series of quality control measures and material control. The raw materials are purchased from well known, local famous mills such as TPCO, Tisco, Baosteel, Valin Group, Wuyang Steel and Luoyang Copper,..etc . We greatly value the repeat orders from commendable references and above all, the trust of our valued clients earned over the years. Our products are well accepted by customers from many countries including PETROBRAS, KOC, KNPC, SHELL, TOTAL, CHEVRON, BP, PDVSA, PEMEX...etc

Due to our excellent quality, reliable performance and reasonable prices, we've established long-term relationships with our customers.Being the far-sighted and with a development vision of internationalization, Y&G will always sticks to the idea of "Y&G's pursuit of value & cooperation is based on mutual benefits". We warmly welcome friends from all over the world to give counsel for development, and sincerely hope the realization of close cooperation on each field.