Product Details
Non Explosionproof Type High Precision UK Sensor Ozone Alarm Tester
For Safe Clean Room
Product overview
YT-96H-WH is designed specifically for disinfection fields such as
pharmaceutical cleanrooms. This is an online monitoring fixed ozone
detector. Adopting imported brand electrochemical principle
sensors, it has small size, light weight, fast response, accurate
detection, reliable operation, and convenient maintenance. 24V DC
power supply, standard 4-20mA, RS485 signal and a set of relay
signal outputs. Non explosion-proof design, required to be
installed in non explosion-proof workplaces.
Product Advantages
- All imported electrochemical principle sensors are used
- Standard three wire 4-20mA analog signal, RS485 signal output
- Compatible with various control boards, PLC, DCS and other control
systems, enabling remote monitoring
- Standard equipped with a set of relay signals that can control
peripheral sound and light alarms, fans, solenoid valves, and other
equipment
- The upper software can achieve setting, calibration, and remote
monitoring.
Specification
Detected gas: | Ozone, etc, according to customer's requirements. |
Detection principle: | Electrochemical |
Measure range: | 0-1000ppb, 0-1ppm, 0-5ppm, 0-10ppm, 0-20ppm, 0-50ppm, 0-100ppm,
etc, according to customer's requirements. |
Resolution: | 1ppb, 0.001ppm, 0.01ppm, 0.1ppm, 1ppm, etc, according to sensor and
measure ranges. |
Accuracy: | ≤±1-2%F.S. |
Response time: | ≤30 seconds (T90) |
Display: | Segment LCD |
Shell material: | Flame Retardant Thermoplastic PS |
Concentration unit: | ppm, mg/m3 |
Alarm mode(Optional): | Buzzer and light, high and low alarm values can be set by customer. |
Signal output: | 4-20mA, RS485, 1 set of relay output; 1-5VDC(optional) |
Communication and data download: | With PC software, history data can be downloaded, stored, printed,
and analyzed in computer (optional) |
Installation method: | Wall-mounted |
Power supply: | 24VDC |
Language: | English |
Humidity: | 0~95%RH (non-condensing) |
Temperature: | -20℃~+50℃ |
Working pressure: | 91~111kpa |
Size: | 80.2*145*62.2mm |
Weight: | 230g (without packaging) |
Package
Accessories & Configuration list
Standard accessories
1. One calibration cap
2. One fixed gas detector
3. A certificate of conformity
4. An instruction manual
Optional accessoires
1. Alarm light
2. 24V DC adapter
When using an ozone detector, the following points should be noted:
- The Industrial Hygiene Standard formulated by the Ministry of
Health in 1979 stipulates a safety standard of 0.15 ppm for ozone.
- According to American standards, personnel can work continuously
for 8 hours at a concentration of 0.1ppm. (Ozone concentration in
general forest areas can reach 0.1ppm)
- According to the International Ozone Association, professional
indoor applications of ozone are allowed to work for 10 hours at a
concentration of 0.1 ppm.
- The concentration that causes certain reactions in personnel is
0.5-1ppm, and the allowable exposure time is 1.5 hours. Over time,
workers may feel discomfort such as dry mouth.
- Concentrations of 1-4ppm can cause coughing, with an allowable
exposure time of 1 hour.
- Concentrations of 4-10ppm can cause strong coughing, with an
allowable exposure time of 20 minutes.
- The half-life of ozone is 20-50 minutes, and the final
decomposition product is oxygen, so it will not cause residual
pollution to food.
Company Profile
Established in 2010, Shenzhen YuanTe Technology Co., Limited is a
company that focuses on the design, production and sales of
environmental monitoring equipment and system. With “gas detector”
as the core product, we have completed production line and
solutions according to different industries, such as Oil, Chemical,
Medicine, Energy, Environmental Protection, Electronic, Municipal
Engineering, Agriculture and Forestry, Household Appliances, etc.
Through about 10 years of rapid development, YuanTe becomes the
influential supplier for environmental monitoring equipment and
system in the domestic and overseas market.
For years, YuanTe always insists on the management concept “Market
is orientation; Innovation is motivation; Quality to survival;
Development to growth”. With friendly, open and strict corporate
culture and standardized management, YuanTe gathers a lot of
talents, and builds up the management team and R&D team. All
the staff cooperates well in product development, production and
maintenance, and has a deep understanding of the concept of
“customer-oriented”, and runs the service spirit through the
company operation and management, to win the trust and support from
customers.
The essence of a detector is the accuracy. Depending on years of
measurement experience and unique solutions, through independent
research and development, cooperative development and learning
overseas latest technology, Unitec’s products are domestic
advanced, and can compete with overseas brand. We are seeking for
development and progress constantly, and trying to meet diversified
demands from customers.