Ozone PPB Level Meter For Safe High Precision UK Sensor Ozone Alarm
Tester
Product overview
YT-96H-WH is specially designed for disinfection field like
medicine clean room. It’s an online monitoring fixed ozone
detector. Using imported brand electrochemical principle sensor,
it’s small and light, fast response, accurate detection, reliable
operation and convenient for maintenance. 24V DC power supply,
standard 4-20mA, RS485 signal and a set of relay signal output.
It’s non-explosion-proof design, so need to be installed in
non-explosion-proof workplaces.
Product Advantages
All use imported brand electrochemical principle sensors
Standard three-wire 4-20mA analog signal, RS485 signal output
Compatible with various control panels, PLC, DCS and other control
systems, can realize remote monitoring
A set of relay signals is standard equipped, and can control
peripheral sound and light alarms, fans, solenoid valves and other
equipment
Setting, calibration and remote monitoring can be realized by the
upper software.
Ozone PPB level Meter Specification
Detected gas: | Ozone, etc, according to customer's requirements. |
Detection principle: | Electrochemical |
Measure range: | 0-1000ppb, 0-1ppm, 0-5ppm, 0-10ppm, 0-20ppm, 0-50ppm, 0-100ppm,
etc, according to customer's requirements. |
Resolution: | 1ppb, 0.001ppm, 0.01ppm, 0.1ppm, 1ppm, etc, according to sensor and
measure ranges. |
Accuracy: | ≤±1-2%F.S. |
Response time: | ≤30 seconds (T90) |
Display: | Segment LCD |
Shell material: | Flame Retardant Thermoplastic PS |
Concentration unit: | ppm, mg/m3 |
Alarm mode(Optional): | Buzzer and light, high and low alarm values can be set by customer. |
Signal output: | 4-20mA, RS485, 1 set of relay output; 1-5VDC(optional) |
Communication and data download: | With PC software, history data can be downloaded, stored, printed,
and analyzed in computer (optional) |
Installation method: | Wall-mounted |
Power supply: | 24VDC |
Language: | English |
Humidity: | 0~95%RH (non-condensing) |
Temperature: | -20℃~+50℃ |
Working pressure: | 91~111kpa |
Size: | 80.2*145*62.2mm |
Weight: | 230g (without packaging) |
Accessories & Configuration list
Standard accessories
1. One fixed gas detector
2. One calibration cap
3. An instruction manual
4. A certificate of conformity
Optional accessoires
1. 24V DC adapter
2. Alarm light
The following points should be noted when using ozone detector
1. The "Industrial Hygiene Standard" formulated by the Ministry of
Health of in 1979 stipulates that the safety standard of ozone is
0.15ppm.
2. The American standard stipulates that personnel can work for 8
hours at a concentration of 0.1ppm. (The ozone concentration in
general forest areas can reach 0.1ppm)
3. The International Ozone Association stipulates that the
professional indoor application of ozone is allowed to work for 10
hours at a concentration of 0.1ppm.
4. The concentration that causes a certain reaction of personnel is
0.5-1ppm, and the allowable contact time is 1.5 hours. After a long
time, worker will feel discomfort such as dry mouth.
5. The concentration of 1-4ppm will cause coughing, and the allowable
contact time is 1 hour.
6. The concentration of 4-10ppm will cause a strong cough, the
allowable contact time is 20 minutes.
7. The half-life of ozone is 20-50 minutes, and the final
decomposition product is oxygen, so there will be no residual
contamination to food.
Contact information:
Celia Wu
SHENZHEN YUANTE TECHNOLOGY CO.,LTD(Safegas)
Mobile/WhatsApp/Wechat: +86 15889417475
Skype: celia.wu888
Email: sales04@szyuante.com