

Add to Cart
Reliable Reputation travelling grate furnace and grate bars design with good prices for textile factory
Travelling grate furnace features:
1. The travelling grate furnace produced by the company, the effective area of the grate is 6-24 square meters, the applicable boiler capacity is 2t/h-25t/h, the effective width of the grate is 1274--3280mm, and the number of wind chambers It is 5-8.
2. The company has the advantages of simple structure, convenient
start-stop and low power consumption, and is widely used in coal
mine heating, urban central heating, chemical, pharmaceutical, food
and small power plants;
3. The company has many years of grate production experience, the
product covers many types of coal, biomass, drying furnace, etc.,
has a good reputation in the industry.
4. The technical requirements of travelling grate furnace for
bituminous coal.
Particle size: 6--30mm.
Moisture content: <12%.
Coal ash content: <30%.
Softening temperature of coal ash: >1250 °C
Adhesion: <5.
5. The travelling grate furnace has a simple structure, low
manufacturing cost, and convenient installation and operation
management.
6. In view of the problem that the traditional travelling grate
furnace is easy to break, the company has developed a large block
of flakes through years of research and development and practical
experience, and combined the original multi-piece grate pieces into
one piece, successfully solved the above problems.
7. For the problem that biomass fuel is prone to ash accumulation
and slagging, the company has effectively controlled the exit
combustion temperature of the furnace and the gas flow rate of the
tail flue through special design, which effectively avoids the
above problems.
Product applications and description
Since the establishment of the company, after years of effort, the grate products cover hot water boilers, steam boilers, organic heat carrier furnaces, hot air drying furnaces, thermal electric boilers and other equipment. A product system that uses coal, biomass, and municipal solid waste as combustion media have been formed. At the same time, it has strong technical force, advanced cold processing, hot processing equipment, large lifting equipment, sophisticated testing equipment and a perfect quality assurance system.
Data sheet of travelling grate furnace
Main technical Parameters of Small Scale Type Fire Grate | |||||||||
Boiler Capacity (t/h) | Active grate area (m2) | Stoker height (mm) | Wheel base (mm) | Active grate width (mm) | Width between two endplates (mm) | Length of shaft out of grate (mm) | Height of shaft out of grate (mm) | Dia. of shaft out of grate (mm) | Qty of wind chamber |
2t/h | 6.2 | 940 | 5800 | 1274 | 1390 | 1000 | 655 | Φ80 | 5 |
4t/h | 4.64 | 825 | 4200 | 1274 | 1390 | 920 | 540 | Φ80 | 4 |
4t/h | 5.81 | 750 | 4300 | 1274 | 1590 | 1137 | 470 | Φ80 | 4 |
6t/h | 9.25 | 880 | 5220 | 1994 | 2110 | 1295 | 598 | Φ80 | 8 |
6t/h | 8.19 | 890 | 5000 | 1854 | 1970 | 1282 | 603 | Φ80 | 5 |
6t/h | 7.41 | 800 | 4910 | 1714 | 1830 | 1200 | 513 | Φ80 | 4 |
8t/h | 9.6 | 880 | 5400 | 1994 | 2110 | 1295 | 598 | Φ80 | 5 |
10t/h | 11.5 | 860 | 6250 | 2034 | 2150 | 1357 | 575 | Φ95 | 5 |
10t/h | 10.86 | 999 | 6325 | 1992 | 2108 | 1390 | 715 | Φ95 | 5 |
10t/h | 12.11 | 1050 | 6000 | 2354 | 2470 | 1620 | 760 | Φ100 | 5 |
10t/h | 11.52 | 992 | 6260 | 2034 | 2150 | 1357 | 710 | Φ95 | 5 |
10t/h | 12.11 | 1050 | 6000 | 2354 | 2470 | 1620 | 760 | Φ100 | 5 |
15t/h | 18.41 | 1050 | 7000 | 2994 | 3110 | 1950 | 765 | Φ100 | 5 |
15t/h | 18.41 | 1050 | 7000 | 2994 | 3110 | 1950 | 765 | Φ100 | 5 |
20t/h | 23.14 | 1050 | 7500 | 3444 | 3560 | 2175 | 765 | Φ130 | 6 |
20t/h | 20.62 | 1060 | 8510 | 2674 | 2790 | 1690 | 773 | Φ125 | 8 |
25t/h | 24.11 | 975 | 8100 | 3280 | 3430 | 2075 | 688 | Φ130 | 7 |
Main technical Parameters of Chain Grate Combustion Device | |||||||||
Data | L-1 | L-2 | L-4 | L-6 | L-8 | L-10 | L-15 | L-20 | |
Boiler | Rated steam output(t/h) | 1 | 2 | 4 | 6 | 8 | 10 | 15 | 20 |
Power(Mw) | 0.7 | 1.4 | 2.8 | 4.2 | 5.6 | 7 | 10.5 | 14 | |
Grate area (㎡) | 2.05 | 3 | 4.7 | 8.08 | 8.88 | 11.8 | 17.8 (16.11) | 22.5 (20.8) | |
Furnace arch (Optional) | 1. Suitable for the furnace arch of Class II.III bituminous coal. 2. Furnace arch for anthracite and its blended fuel. |
Furnace coal fired chain grate stoker can be applied in a chemical plant, university, food factory, beverage factory, cannery, textile mills, paper mill, sugar plant, central heating and other industries.