AFK High Pressure Stainless Steel Pressure Regulator Precision 25Mpa For Nitrous Oxide
Brand Name:AFK
Certification:CE
Model Number:R11
Minimum Order Quantity:1
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
Foor 2, 4th Buidling, A Zone, Xinhe Xinxing Industrial 3th Zone, Fuhai Avenue, Baoan, Guangdong, China.
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
Product Description for Single stage pressure reducer
The pressure reducer is often used in laboratories or factories, and all gas contacts that use gas need to be depressurized before they can be used. Our product is specially designed for pressure reduction, and the workmanship is very fine, which is much more beautiful than the products of the same industry
Applicable scenarios
Wall mounted installation of secondary pressure relief device
Installation of single pressure reducer
Specification for Single stage pressure reducer
ORDERING INFORMATION
| R11 | L | B | D | F | G | 00 | 00 | P |
| Item | Body Materia | Body Hole | Inlet pressure | Outlet pressure | Pressure gauge | Inlet size | Outlet size | mark |
| R11 | L:316 | A | D:3000 psi | F:0-500 psi | G:MPa gauge | 00:1/4 " NPT (F) | 00: 1/4 " NPT(F) | P:Panel mounting |
| B:Brass | B | E:2200 psi | G:0-250 psi | 01:1/4 " NPT (M) | 01: 1/4 " NPT(M) | N:Needle valve | ||
| D | F:500 psi | l:0-100 psi | P:Psig/bar gauge | 23: CGA330 | 10:1/8 " OD | N:Needle valve | ||
| G | K:0-50 psi | 24: CGA350 | 11:1/4 " OD | D:Diaphragm valve | ||||
| J | L:0-25 psi | W:No gauge | 28: CGA660 | 12:3/8 " OD | ||||
| M | 28: CGA660 | 15:6mm OD | ||||||
| 30: CGA590 | 16:8mm OD | |||||||
| 52: G5/8 "-RH(F) | ||||||||
| 63: W21.8-14H(F) | ||||||||
| 64: W21.8-14LH(F) |
| Material List of Co2 Regulators | |||||
| 1 | Body | SS316L, brass, nickel plated brass ( Weigh :0.9kg) | |||
| 2 | Cover | SS316L, brass, nickel plated brass | |||
| 3 | Diaphragm | SS316L | |||
| 4 | Strainer | SS316L(10um) | |||
| 5 | Valve Seat | PCTFE,PTFE,Vespel | |||
| 6 | Spring | SS316L | |||
| 7 | Plunger Valve Core | SS316L | |||
| Technical Data OF Pressure Regulator for Co2 Gas Cylinders | |||||
| 1 | Maximun Input Pressure | 500,3000 psig | |||
| 2 | Output Pressure Range | 0~25, 0~50, 0~100, 0~250, 0~500 psig | |||
| 3 | Safety Testing Pressure | 1.5 times of maximum input pressure | |||
| 4 | Working Temperature | -40°F~ +165°F (-40°C~ +74°C ) | |||
| 5 | Leakage Rate | 2×10-8 atm cc/sec He | |||
| 6 | CV Value | 0.08 | |||
Installation instructions and precautions of pressure reducing valve
1. Before installing the pressure reducing valve, the pipeline must be cleaned, and the gas shall be used for continuous purging to completely remove the magazines and particles, such as scrap iron, when cutting the pipeline;
2. The filter must be installed at the upstream of the pressure
reducer, otherwise the system particles will damage the valve seat,
causing internal leakage of the pressure regulator, rising
downstream pressure, and easily damaging the outlet pressure gauge
or other equipment. It is recommended to use a filter element with
a precision of no less than 2 microns;
3. It is not recommended to use thread or liquid raw material tape
for NPT thread installation. Improper operation may lead to liquid
flowing to the filter element in the valve, which may lead to
blockage of the filter element. Finally, there is no pressure at
the valve outlet, or the flow is too low;
4. In the flow state, turn the handle clockwise to increase the
outlet pressure. Turning the handle counterclockwise may cause the
thread to get stuck, or the handle is loose and cannot be adjusted
again;
5. It is not recommended to use the pressure reducing valve as a
stop valve for a long time, otherwise the valve seat may be
deformed, resulting in unstable flow;
6. Handle with care to avoid any impact, especially the pressure
reducing valve with pressure gauge. The pressure gauge is a
sensitive element, which may be damaged by external force.
Project Case
This is the layout of the air supply direction of the whole room at the air supply end. We have a professional design team to draw and design drawings by visiting the site, and then professional construction personnel will carry out construction according to the drawings.
FAQ
1. who are we?
We are based in Guangdong, China, start from 2011,sell to Southeast Asia(20.00%),Africa(20.00%),Eastern Asia(10.00%),Mid East(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),Central America(5.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),North America(5.00%). There are total about 51-100 people in our office.
We are based in Guangdong, China, start from 2011,sell to Southeast Asia(20.00%),Africa(20.00%),Eastern Asia(10.00%),Mid East(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),Central America(5.00%),Western Europe(5.00%),South America(5.00%),Eastern Europe(5.00%),North America(5.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
pressure regulator,Tube fittings,solenoid valve,Needle valve,check
valve
4. why should you buy from us not from other suppliers?
We have a couple of years with professional engineers and dedicated
technicians.can provide security products for you
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,Western Union;
Language Spoken:English,Chinese
AFK High Pressure Stainless Steel Pressure Regulator Precision 25Mpa For Nitrous Oxide
Inquiry Cart
0