220V IGBT Induction Welding Brazing Machine Inventor Steel Tube High Frequency

220V Intermediate Frequency small IGBT Inventor metal brazing induction heating machine

1. Brief Introduction of High Frequency Induction Brazing Machine :

Tube welding heat treatment is very common in daily life and very common in machining. But butt welding between pipes is not so easy, because for small pipes or pipes with thin walls, welding is more troublesome. Using high frequency induction heating furnace to weld heat treatment on the tube, the effect is very good.

2. Technical Parameters of LSW-16 Induction Heating Machine:

3. The performance characteristics of high frequency induction heating machine:
1. Adopt brand IGBT power devices and unique inverter technology, full-load continuous rate design, sprocket quenching equipment | sprocket quenching machine runs 24 hours at maximum power, and high reliability is guaranteed.
2. The automatic control type can adjust heating time, heating power, holding time, holding power and cooling time; greatly improve the quality of heating products and the repeatability of heating, and simplify the operation technology of workers;
3. It is light in weight, small in size and simple in installation. It can be connected to 380V three-phase power supply, water inlet and outlet, and it can be completed in a few minutes.
4. Small footprint, simple operation, can be learned in a few minutes;
5. Especially safe, the output voltage is lower than 36V, avoiding the danger of high voltage electric shock;
6. The heating efficiency is as high as 90% or more, the energy consumption is only 20%-30% of the high frequency of the old electronic tube, almost no electricity is needed in the standby state, and it can work continuously for 24 hours.
7. The sensor can be freely and quickly disassembled and replaced, and the ultra-fast heating greatly reduces the oxidation deformation of the workpiece.

A. Fast Heating: the quickest heating speed is less than 1 second, and the heating speed adjusting and control are available.
B. Widely Applicable: it can be used to heat various metal parts.
C. Low Power Consumption: compared with traditional heating method, the heat efficiency can be over 95%.
D. High Effectiveness: fast warming and uniform heating, reduce the workpiece oxidation and deformation.
E. High Efficiency: can do 24 hours continuously working with comprehensive full load design.
F. Small Footprint & Light Weight:save space of workshop and easily moved.
G. Easy Operation: easy installation and operation, which can learn in only several minutes. It can be started to peform on condition that water and power supply are available.
H. Environmental Friendly: free of noisy, exhaust gas and dust, so can provide a better working surroundings

4. Induction Brazing Machine Application:

Heat treatment industry
1. a variety of steam, Motorcycle high-frequency hardening heat treatment, such as: crankshaft, connecting rod, piston pin, camshaft, valves, various gears within the gearbox, a variety of fork, all kinds of spline shaft, drive axle, various small shaft crank pin, a variety of rocker, rocker shaft, high-frequency hardening heat treatment.
2. the hardware high-frequency hardening heat treatment, such as pliers, hammers, strong pliers, wrenches.
3. hydraulic components such as: piston pump plunger, rotor pump rotor, conversion shaft of the valves, gear of gear pump high frequency quenching.
4. various electric tools gear shaft of the high-frequency hardening heat treatment.
5, a variety of carpentry tools, such as: axes, planing and other heat treatment.
Forging industry
1. plate heating, bending and forming.
2. standard parts, fasteners through the hot forming.
3. the hardware tools through heat, such as pliers, wrenches and other heat through hot forming.
4. taper shank drill rod extrusion prospecting.
5. the pipe through the hot forming, such as bends and so on.

Brazing
1. carbide cutting tools welding. Such as turning, milling, cutter knife.
2. the diamond saw blade welding. Such as diamond saw blade, abrasive, jagged welding. Exploration drill bit used in welding, such as word drill, drill welding horns.
3. brass, copper

Smelting
Steel,iron, non-ferrous metals,graphite crucible smelting

Zhengzhou Lanshuo Electronics Co., Ltd is located in Zhengzhou National High& New Technology and Industrial Development Zone. Our mission is to provide customers the highest quality products to gain the reputation by focusing on customer satisfaction.

15-year experience in the R&D, design, production of high frequency and medium frequency induction heating machines. Products have won great reputation among clients.

Our main products are High Frequency IGBT Induction Heating Machine and Super Audio Induction Heating Machine, CNC Quenching Machine Tool, Medium Frequency Induction Melting Furnace, KGPS Medium Frequency Induction Melting Furnace, Open type Cooling Tower, Closed Type Cooling Tower, Water Cooling Chiller, etc.

Our roducts' quality are reliable, the performance are excellence. Our equipments are widely used in the industry of melting, casting, forging, heating, heat preservation,hot rolling, brazing, annealing, quenching, hot fitting, bending before heat treatment etc.

We have exported to Pakistan, Egypt, India, Vietnam, Mexico, Uganda, Ukraine, Serbia, Russia, Germany, Turkey, South Korea, Malaysia, Philippines and other countries.

Welcome friends from all over the world to visit our factory and give valuable advice.