Add to Cart
1. Brief Introduction of Electric steel melting furnace:
Melting metals with solid state induction heating is usually
accomplised by heating the metal in a crucible made from a
non-conductive refractory meterial. The charge of metal within the
crucible is melted down to liquid form.
This process is commonly used to produce high quality steels and
non ferrous alloys for casting operations. The liquefied metal is
poured into a cavity having the desired shape. The metal solidifies
with a minimum of shrinkage,after which the mold is removed to
reveal a finished, machinable product. For example:melting for
gold, silver, copper, aluminum, stainless steel and other metal
materials.
Apply to: jewelry casting, precious metal purification, copper smelting, molten aluminum, slag smelting, metal composition analysis, smelting process test.
2. Melting Capacity of steel melting furnace :
|
3. Small steel melting furnace Feature:
1. Adopt Simens IGBT power device.
2. Fast heating: the fastest heating is less than 1 second, and the
heating speed can be adjusted and controlled;
3. It has good electromagnetic stirring effect, which is conducive
to the temperature of the smelting metal and the uniformity of the
structure, which is beneficial to scumming and reducing impurities;
4. The frequency range can be from 1KHz to 30KHz, and the induction
coil and matching capacitor box can be designed according to the
specific requirements according to the melting amount;
5. High heating efficiency and low noise during operation;
6. Energy saving and environmental protection: the thermal
efficiency reaches over 95%, perfect replacement for thyristor,
gas, acetylene, coke, electric furnace;
7. The maximum furnace temperature can reach 1000-1600 degrees;
8. Machine safety is reliable: the machine is equipped with
automatic protection functions such as overcurrent, phase loss,
water shortage, overvoltage, short circuit and overheating;
9. The machine is easy to install and operate. It is professionally
debugged before leaving the factory. It does not need to be
commissioned by the door.
4. Company Brief Introduction :
5. Our Service:
(1) Before sales
Our professional technical recommend the right machine,and can also
customise special machine as customer’s requirement and special
parts.
(2 )Sales following
During machine production, watching the machine quality and testing
machine.and take pictures or make video for customer checking.
(3 )After Sales
Machine have one year quality warranty ,one year free replacement
spare parts ( 1 set of spare parts free for your stock, in case it
need replacement).Supply pictures or video help customer to install
machine.Provide long-terms technical support.