SpO2 Dental Implant Machine

LK-U31 New Products Portable Dental Patient Moniter for Surgery

Description
Portable Patient Monitor (Figure 1-1) is adaptable to adult, pediatric and neonatal usage. It can monitor vital signals as ECG, Respiratory Rate, SpO2, NIBP, TEMP and IBP. It integrates parameter measuring modules, display and recorder in one device, featuring in compactness, lightweight and portability. Replaceable built-in battery facilitates transportation of patient. Large high-resolution display provides
clear view of 5 waveforms and full monitoring parameters.

The POWER switch is on the left quarter of the front panel (in Figure 1-1). The POWER indicator(in Figure 1-1) and the BATT indicator ( in Figure 1-1) lights when the device is powered on. The ALARM indicator flashes or lights when alarm occurs ( in Figure 1-1).The sockets of the sensors are at the right side. The recorder socket is at the left side. Other sockets and power plug-in are at the
back.
Do not immerse the connector in any liquid. After cleaning, dry the transducer thoroughly before storing. Slight discoloration or temporary increase of surface stickiness of the cable should not be considered abnormal If adhesive tape residue must be removed from the transducer cable, double seal tape remover is effective and will cause a minimum of damage to the cable if used sparingly.
Acetone, Alcohol, Ammonia and Chloroform, or other strong solvents are not recommended because over time the vinyl cabling will be damaged by these agents.

Liquid Chemical Sterilization
Remove obvious contamination by using the cleaning procedure described previously. Select a sterilant that your hospital or institution has found to be effective for liquid chemical sterilization of operating room equipment. Buffered gluteraldehyed (e.g. Cidex or Hospisept) has been
found to be effective. Do not use quaternary cationic detergents such as zephiran chloride. If the whole unit is to be sterilized, immerse the transducer but not the electrical connector into the sterilant for the recommended sterilizing period. Be sure that the dome is removed. Then
rinse all transducer parts except the electrical connector with sterilized water or saline. The transducer must be thoroughly dried before storing.
Gas Sterilization
For more complete asepsis, use gas sterilization.
Remove obvious contamination by using the cleaning procedure described previously. To
inhibit the formation of ethylene glycol when ethylene oxide gas is used as the disinfectant, the
transducer should be completely dry.
Follow the operating instructions provided by the manufacturer of the gas disinfectant.



1. How can I place an order?
You can contact any of our sales person for an order. Please provide the details of
your requirements as clear as possible. So we can send you the offer at the first time.
For designing or further discussion, it is better to contact us with Skype, TradeManger or QQ or WhatsApp or other instant ways, in case of any delays.
2. When can I get the price?
Usually we quote within 24 hours after we get your inquiry.
3. Can you do the design for us?
Yes. We have a professional team having rich experience in gift box design and manufacturing.
Just tell us your ideas and we will help to carry out your ideas into perfect boxes.
4. How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready
for delivery in 1-3 days. The samples will be sent to you via express and arrive in 3-5 days.
5. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.
Always 25-28days based on general order .
6. What is your terms of delivery?
We accept EXW, FOB, CFR, CIF, etc. You can choose the one which is the most convenient
or cost effective for you.
7. What is the payment way?
1)TT or Wester Union for the trial order
2) ODM, OEM order, 30% for deposit,70% against the copy B/L.


Zhengzhou Linker Medical Equipment Co., Ltd. is located in Zhengzhou, central area of China, a traditional commerce city with rich history and culture. Since 2007, our company has been focusing on dental products export, including dental equipments and materials, dental cultural products and electrical products and so on.
We believe that quality of products and service are the lifeline of enterprise. Our company has strict control on products quality, partners' selection. All of our products are popular in Europe, America, Middle East, Asia Area more than 50 different countries and areas.
While developing long and lasting cooperation with many big companies in these areas, we are seeking for more new partners from all over the world. If you need any dental products, don't forget to give us enquiry, we will discuss further on our mutual beneficial cooperation. Our main products are dental unit, air compressor, autoclave, X ray unit, ultrasonic scaler, light cure, air turbine handpiece, intra-oral camera and apex locator.
Meanwhile we can supply branded products from Dentsply, Mani, Saeshin, Saeyang, Woodpecker, Vita, Meta, Coxo, Greatstar, BEING, SINOL, RUNYES, GAPADENT, SUPLINE, SMIC and so on. "For your better clinic, for all better teeth, for most beautiful smile" is our goal of developing. Welcome to visit website or company to know more. Thanks very much.

Zhengzhou Linker Medical Equipment Co., Ltd. is located in Zhengzhou, central area of China, a traditional commerce city with rich history and culture.

Since 2007, our company has been focusing on dental products export, including dental equipments and materials, dental cultural products and electrical products and so on. We believe that quality of products and service are the lifeline of enterprise. Our company has strict control on products quality, partners’ selection. All of our products are popular in Europe, America, Middle East, Asia Area more than 50 different countries and areas. While developing long and lasting cooperation with many big companies in these areas, we are seeking for more new partners from all over the world. If you need any dental products, don’t forget to give us enquiry, we will discuss further on our mutual beneficial cooperation.

Our main products are dental unit, air compressor, autoclave, X ray unit, ultrasonic scaler, light cure, air turbine handpiece, intra-oral camera and apex locator. Meanwhile we can supply branded products from Dentsply, Mani, Saeshin, Saeyang, NSK, Woodpecker, Vita, Meta, Coxo, Greatstar, BEING, SINOL, RUNYES, GAPADENT, SUPLINE, SMIC and so on.

“For your better clinic, for all better teeth, for most beautiful smile” is our goal of developing. Welcome to visit website or company to know more. Thanks very much.