4000BPH Capacity Bottle Blow Molding Machine Making 660ml Bottle IOS9001

RM-4000 type Automatic PET Bottle Blowing / Making Machine is suitable for blowing PET bottles of various shapes, volume from 100 ml to 2000 ml, wide application for blowing mineral water bottles, soda bottles, cola bottles..

The unique cam linking system integrates mold-opening, mold-locking and bottom mold-elevating in one movement, equipped with high speed servo driving system which greatly shortens the blowing cycle and accelerates the speed.

Equipped with remote monitoring system, engineers in China headquarter can check the data collected and sent by the PLC anytime with the mobile, feedback will be informed to the client' s site if something abnormal,give the machine 24 hours' baby care in the cradle

Feature

Up to 45% less by heating
In our blower, preform distance is only 38mm, with fewer lamps, you can heat more preforms

Up to 30% less by air
This machine is fully driven by servo motor, no need low pressure air
We also decrease the dead volume in the blowing station to reduce high pressure air consumption

Up to 20 mins change mold
What if you change mold like open & close a drawer?
With our special quick-mold-change design, mold can find position itself. and be changed within 20 minutes

Up to 80% less maintain cost
Changing new air cylinders and seal rings is main maintain cost in blower
We adopt servo motors, It is more reliable and almost no need maintain cost

A. Stable performance with advanced PLC.

B. Conveying preforms automatically with conveyor.

C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.

E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

Technical Details

Machine Parts

2. Name: American Nylon Slider
The Nylon Sliders center distance won't be Elongated. Even the machine long-term high-speed working, (Chain-type long term operation will make The center distance elongated)

3. Name:Bottle Mould

4. Name: Clamping Unit

Using the hyperbolic arm and high pressureto clamp with strong clamping force, ensure theclamping machine more stable and high speedOperation.

Using the oil distributor system, So that the lubri-cating points of the clamping equipment can getuniform lubricating oil.

Taizhou Huyang Reliable Machinery Co.,Ltd​

WHY CHOOSE US?

In the background of fierce competition in the machinery industry. RELIABLE Machinery has overcome a lot of difficulty and won the applause

of various customers with its pure-hearted developed spirit, advanced design concept, reliable quality and perfect service and management.

The product is exported to many countries, such as Russia, Iran, Egypt, Brazil, Mexico, Bangladesh and so on. We believe that Taizhou Huyang Reliable Machinery Co.,Ltd​ is your trustworthy partner who is the most valuable for you to cooperate with the factory whole heartedly wishes

to cooperate with you hand in hand and seek mutual development.