Custom Made HV 12S 400A RC Car ESC Remote Control Speed Controller
Brand Name:BigFlier
Certification:CE
Model Number:F-12S-400A-C
Minimum Order Quantity:1
Delivery Time:2-5 working days
Payment Terms:Paypal, TT
Contact Now
Add to Cart
Site Member
Location:
Shenzhen Guangdong China
Address:
5 Floor,SongShan Building B14, YinTian Industrial Zone, Baoan District, Shenzhen,China
Supplier`s last login times:
within 24 hours
Product Details
Company Profile
Product Details
HV 12S 400A Intelligent Brushless Controller ESC for RC Car Traxxas
Basic information:
| Voltage | Current | Size(mm) | weight(g) | BEC (Volts/Amps) | Box Programming support | Computer Programming support | Firmware update | |
| 4-12S | 400A | 122*62*61 | 450g | OPTO | Yes | Yes | Yes |
ESC Info:
1:There are three pins wires for the receiver port, length is
300mm:
---The brown wire is ground,
---The yellow wire is pulse signal wire, it is a 5V PWM pulse
signal and you just controll the ESC via the wire,
---The red wire is the power wire 5V input to the ESC; you must
supply a 5V voltage to the red wire otherwise the ESC won't work.
2:A standard receiver signal is 1-2mS@50Hz. It is saild that the
receiver will send 1-2mS 5V pulse per 20mS to the ESC. 1mS pulse
will arm the ESC,and the motor will stop. when increase the
throttle, the pulse width also increase, about 1.1mS, the motor
will start to spin, and 2mS, the motor will spin at full speed.
3:Baterry wire: length 180mm, double 8AWG. Red wire connect to the
positive pole, black connect to the negative pole. The black side
of the small black 18AWG line is Anti-spark wire,It is built in a
bullet connector and a 10 ohms resistor. You must connect the end
of the wire to the battery negative. you can connect the red wire
of ESC to the positive pole of battery at first. Then connect the
anti-spark wires well. The last step is to connect the black wire
of ESC to the battery’s negative pole. If do so, no spark will be
generated, and this will protect the main bullets connector from
spark damage.
4.Motor wire; 3 pcs balck wire, 8AWG, 180mm.
5.Program wire: 4 pins, length 100mm. Use USB link to program via
PC or program via program box.
Feature:
1. The firmware is upgraded recently .
2.Two way communication while connecting it with computer.
3.At present, there is no electromechanical adjustment method:
Turn on the remote control - the highest throttle - power on (slow
drop) --- power off --- power on again (two drops) --- the lowest
throttle (long sound drops) - power off - off Control ===== ESC
calibration is completed,
Do not install paddles for calibration ESC, otherwise it is
dangerous!
Setting function value:
1. Reverse: On/Off.
2. Timing:0°,1°,2°,3°,4°……30°.
3. Frequency: 8KHz, 16 KHz, 32 KHz.
4. Acceleration: Soft / Medium / Hard.
5. Accumulator type:NiCd/NiMh,Li-Ion/Li-Pol,LiFe.
6. NiCd/NiMH CUTOFF:×0.05,0.4V,0.5V,0.6V,0.7V,0.8V,0.9V,1.0V.×0.05 means the cut off voltage
is 5% the voltage while connecting.
7. Number of cells:Auto,2S,3S,4S,5S,6S,7S,8S,9S,10S,11S,12S,16S.
8. LiIo/Pol
CUTOFF:2.0V,2.1V,2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V,2.9V,3.0V,3.1V,3.2V,3.3V,3.4V,3.5V,3.6V.
9. LiFe cutoff:2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V
10. Cut Off Type::Slow down,Hard. l
11. Power limited forward: Off, 75%, 50%, 25%.
12. Power limited reverse: Off, 75%, 50%, 25%.
13. Delay time when direction convert: 0.25S, 0.5S, 0.75S, 1S,
1.5S, 2S, 3S, 5S.
14. Reverse point:Auto,fixed 1.0mS,fixed 1.1mS,fixed 1.2mS,fixed 1.3mS.
15. Forward point:Auto,fixed 1.7mS,fixed 1.8mS,fixed 1.9mS,fixed 2.0mS.
16. Throttle curve: Logarithmical,Linear,Exponential.
17. Rotation direction: Left, Right.
18. Timing monitor (TIMING MONTITOR): ON, Off.
Note:the red mark is the factory default value,you can setting
function value by youself.
Pictures:
Trade Terms:
1.Payment :T/T ,Paypal,West union .
2.Production lead time :5 days for 100-200 pcs ,10days for
200-300pcs .
3.Sample can be delivered within 3 days.
4.Discounts are offered based on order quantities .
5.MOQ: 2 pcs.
Shipping&Return:
1. Items will be shipped within 3 business day after payment
completed received.
2. Items are shipped from DHL Express ,UPS ,EMS,, reach most of the
countries within 3-7 days respectively.
3. Warranty Period is 2 yrs for this item.
4. If product can not work, or find it as defects within in 7 days
after receipt, please contact us, we will replace or refund.
5. All emails will be answered within 1 working day.
Custom Made HV 12S 400A RC Car ESC Remote Control Speed Controller
Inquiry Cart
0