3.3 V HTN Lcd Negative Display Panel Drive Parameter 1/4 Duty 1/3 Bias
Brand Name:Fangsheng
Certification:ISO9001:2015
Model Number:FHP2511GP01
Minimum Order Quantity:500
Delivery Time:3 ~ 5 Working Days
Payment Terms:T/T,Western Union, Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
2 Building, BaiDai Industrial Park,DaoJiao Town,Dongguan, Guangdong China
Supplier`s last login times:
within 39 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
7 Segment Lcd Display HTN Lcd Negative Display Panel Custom Size Lcd Display Module
Rear polarizer type:
There are three types of polarizer: transmission polarizer; transflective polarizer and reflective polarizer.
A. If No LED backlight, please choose reflective polarizer.
B. If LED backlight is necessary,then you can choose transmission or
transflective polarizer.
C. Transflective polarizer is better and expensive than transmission
polarizer. But transflective LCD will have a uniform light result
compared with transmission polarizer. What is more, when LED
backlight is off, transflecitve LCD will also have a good display
result.
D. For transmission polarizer, when it is negative LCD or LED
backlight alway be on, then it is better use transmission
polarizer.
Basic Information:
ITEM | CONTENT | DESCRIPTION |
1 | Display Outline Size | 52 ( H ) * 45 ( W ) * 1.1 mm ( T ) |
2 | Viewing Size | 49 ( H ) * 40 (W) mm |
3 | Voltage | 4.5V |
4 | Operation Temperature | -20～70℃ |
5 | Drive Parameter | 1/4 Duty 1/3 Bias |
6 | Backlight | 3pcs Led |
7 | Color | White |
8 | Interface | Pin |
Connection mode of LCD.
How to connect LCD on your PCB?There are four type of connectors
for your choice.
1. Metal pin connector. It is very common connection way. Pins should insert into PCB holes and solder it. It is very strong and firm. LCD,LED backlight or PCB can be connected together as a LCD module.
2. Zebra strip.When it is zebra strip connector ,then zebra strip should be
between LCD and PCB.You should compact LCD and PCB evenly,so that
zebra trip can contact and breakover PCB with LCD.
For the connection,If you must make sure that LCD and PCB can be
compacted well, or else LCD can't be displayed or just display a
part.
But zebra strip is cheap.
3.Heat seal paper.Heat seal paper is a flexible connect way. Heat seal paper can be heated pressing on LCD and PCB directly. But head seal is easy to be oxidized after a few years.
4.FPC(Flexible Printed Circuit) connection. FPC connector is also a flexible connect way. FPC quality is very good compared with heat seal paper. It is a good connection way,but price and tooling charge is higher.
Inspection Standard
Surface Inspection | 18 | Requirement Postive Lcd Display: Punctiform defective (Lcd with dirty spots, paster with dirty spots, glass surface damage, polarizer damage (after the paster is visual) Φ=(L+W)/2 L=Length W=Width | Inspection Standard | ≤10 mold | 11~30 mold | 31~80 mold | >80 mold |
φ≤0.1mm | Ignored | Ignored | Ignored | Ignored | |||
0.1mm<φ≤0.2mm | 3 | 3 | 2 | 2 | |||
0.2mm<φ≤0.25mm | 1 | 1 | 0 | 0 | |||
0.25mm<φ≤0.3mm | 0 | 0 | 0 | 0 | |||
0.3mm<φ≤0.35mm | 0 | 0 | 0 | 0 | |||
0.10mm<φ≤0.35mm accept total quantity | 3 | 3 | 2 | 2 | |||
Note: 1. 0.15mm<φ≤0.25mm the distance between two points should be >5mm, the above defects status can be ignored when it is outside of V/A area. There are special status subject to customer request or sample signed | |||||||
Requirement Negative Lcd Display: Punctiform defective (Lcd with dirty spots, paster with dirty spots, glass surface damage, polarizer damage (after the paster is visual) Φ=(L+W)/2 L=Length W=Width | Inspection Standard | ≤10 mold | 11~30 mold | 31~80 mold | >80 mold | ||
φ≤0.1mm | 6 | 5 | 4 | 3 | |||
0.1mm<φ≤0.2mm | 3 | 3 | 2 | 1 | |||
0.2mm<φ≤0.25mm | 0 | 0 | 0 | 0 | |||
0.25mm<φ≤0.3mm | 0 | 0 | 0 | 0 | |||
0.10mm<φ≤0.35mm accept total quantity | 6 | 5 | 4 | 3 | |||
Note: 1. 0.1mm<φ≤0.25mm the distance between two points should be >5mm, the above defects status can be ignored when it is outside of V/A area. 2. There are special status subject to customer request or sample signed | |||||||
3.3 V HTN Lcd Negative Display Panel Drive Parameter 1/4 Duty 1/3 Bias
Inquiry Cart
0