Solid Cemented Tungsten Carbide Nozzle Medium Particle Higher Density

Solid Cemented Tungsten Carbide Nozzle Medium Particle Higher Density

Tungsten Carbide Nozzle Applications

The cemented carbide nozzles will be used mainly to PDC drill bits and roller core flushing, drill bits for cooling and lubricationg drill bit tips and cleaning stone chips in the well bottom with drilling liguid in the working conditions of high pressure, vibration, sand and slurry impacting during oil and natural gas prospecting.

Cemented carbide can be used for making the drill bits/ end-mills / reamers; automobile special cutters, printed circuit board special cutters, engine special cutters, horologe processing special cutters, integral vertical milling cutter, graver and etc. Besides, they can be also used for making of cemented carbide stamping head, core bar and perforation tools.

Tungsten Carbide Nozzle spcifications:

Use superfine nanometer tungsten carbide particles, the wear-resisting performance to the next level, superior
wear resistance makes it far beyond the ordinary tungsten carbide,The service life of the nozzle.Cobalt
content of less than 0.6%, density of 15.45 g/cm3 ~ 15.6 g/cm3, bending 2000 mpa to 2400MPa.Super oxygen resistance, small thermal expansion coefficient, unique high hardness and density, far beyond the other similar products, the use of hard Alloy tube abrasion resistance stronger.
Sand tube due to high-speed abrasive particle erosion, its selection is very important.Sand tube material, in general, must have high hardness, high resistance Grinding, both be short of one cannot.Generally for tungsten carbide composite materials processing.Usually, cemented carbide, WC as the main
resistance,Grinding phase exists in the form of particles, CO, just as the binder.
Use: widely used in various types machine, WHP type, FLOW type, type JET, KMT, OMAX type, type WS.