LPET110440L-KR,Shining Sharp Tungsten Carbide Inserts For Aluminum , Copper , Titan Alloy

Shining Sharp Tungsten Carbide Inserts For Aluminum , Copper , Titan Alloy

Tungsten Carbide Inserts Introduction:

Shining sharp, no buildups.

Good heat resistance, and wear resistance.

Suitable for cutting at higher temperatures.

Chemical stability, impact resistance.

10 pieces per box, clear packaging mark.

Clamping characteristics and requirements of indexable turning tool blades:

A. The change of tool tip position should be within the allowable range of workpiece accuracy when the positioning accuracy is high and the blade is changed or a new blade is replaced.
B. The reliable clamping of blades should ensure that the contact surfaces of blades, tool pads and tool rods are closely fitted and can withstand impact and vibration, but the clamping force should not be too large and the stress distribution should be uniform so as to avoid crushing the blades.
C. Smooth chip removal blade in front of the best barrier-free, to ensure the smooth chip discharge, and easy to observe.
D. Easy to use, easy to change blades and update blades. For small size cutters, the structure should be compact. When meeting the above requirements, the structure is simple and the manufacture and use are convenient as far as possible.

Tungsten Carbide Inserts Parameters

YG3X 14.6-15.2 1320 92 is suitable for high speed finishing of small cutting sections of cast iron, non-ferrous metal and alloy quenched steel alloy steel.

YG6A 14.6-15.0 1370 91.5 is suitable for semi-finishing of hard cast iron, non-ferrous metals and their alloys, as well as semi-finishing and finishing of high manganese steel, quenched steel and alloy steel.
The production and application of

YG6X 14.6-15.0 1420 91 show that the alloy has good effect in processing cold-hard alloy cast iron and heat-resistant alloy steel, and is also suitable for surface treatment of ordinary cast iron.

YG6 14.5-14.9 1380 89 is suitable for medium cutting speed semi-finishing of cast iron, non-ferrous metal and alloy non-metallic materials.

YG6X-1 14.6-15.0 1500 90 is suitable for continuous cutting, semi-precision turning, small section precision turning, rough turning thread, continuous section semi-precision milling, hole roughing and precision milling of cast iron, non-ferrous metal and its alloy non-metallic materials.

YG8N 14.5-14.8 2000 90 is suitable for high speed cutting of cast iron, white cast iron, nodular cast iron, chromium, nickel stainless steel and other alloy materials.

YG8 14.5-14.9 1600 89.5 is suitable for rough turning, roughing, grinding, drilling and reaming of general and deep holes in the processing of cast iron, non-ferrous metals, their alloys and non-metallic materials.

YS2T 14.4-14.6 2200 91.5 belongs to superfine grain alloy. It is suitable for milling low-speed rough turning, heat-resistant alloy and titanium alloy. It is used as cutting tool, tap and saw blade milling cutter.

YT15 11.0-11.7 1150 91 is suitable for rough turning, semi-finishing turning and finishing turning in continuous cutting, small cross-section finishing turning in intermittent cutting, semi-finishing turning and finishing turning on continuous surface, rough and precise expanding of holes in processing of carbon steel and alloy steel.

YT5 12.5-13.2 1430 89.5 is suitable for rough turning, rough shaving, semi-fine shaving, rough grinding and drilling of discontinuous surfaces of carbon and alloy steels (including steel forgings, stamping parts and casting surfaces).

YS25 12.8-13.2 2000 91 is suitable for rough turning, milling and planing of carbon steel, cast steel, high manganese steel, high strength steel and alloy steel.

YT14 11.2-12.0 1270 90.5 is suitable for rough turning, rough turning and continuous cutting in the processing of carbon steel and alloy steel, semi-finish turning and precision turning in intermittent cutting, continuous rough turning, drilling and rough expansion of casting holes.

YW1 12.6-13.5 1180 91.5 is suitable for the processing of refractory steel, high manganese steel, stainless steel, common steel and cast iron.

YW2 12.4-13.5 1350 90.5 is suitable for finishing and semi-finishing of heat-resistant steel, high manganese steel, stainless steel and high alloy steel. Processing of common steel and cast iron.

Zhuzhou Weikeduo Cemented Carbide Co., Ltd is located in Zhuzhou’s national-level high-tech development zone. Weikeduo has been designed and constructed all based on the requirements of production process of internationally leading cemented carbide and has in its possession internationally leading production and measurement equipment.

At present, Weikeduo is concentrating its attention on the research and development and production of high- performance cemented carbide materia and high precision cemented carbide cutting inserts. Through recent years, it has gradually developed its products category and steadily improved products’ quality, winning good appraisal from customers both at home and abroad.0

Imported internationally leading production process for cemented carbide and the overall implementation of ISO9001 total quality control system make the products quality stabilized and trusted. Weikeduo has in its possession quite a number of technical personnel with high and middle ranks including 3 national level specialists. Weikeduo all along adhere to the principle of “Human beings as the core” and has brought up an excellent team of staff and employees who make unremitting efforts to improve themselves and are bold in making innovations.

“Creating value for customers, Weikeduo makes win-win a reality” is the Weikeduo’s firm and steadfast mission.