Autochuck HighSpeed Handpiece with 4-Hole Connector

Triple Water Spray High Speed Dental Handpiece Stainless Bearing Push Button

Product Parts:
Consists of handpiece head, handle, cartridge.
Working Conditions:
1. Air pressure 0.25~0.30mpa,must be filtrated.
2. Use high speed dental bur with shaft diameter Φ1.59~1.60mm×21-23mm and roghtness less than 0.8um.
3. The amount of handpieces spray or water spray should be able to adjusted.
4. Hard glass fiber,can be repeatedly sterilized in high temperautre and pressure.
Product Scope:
Only used for drilling, molar of stomatology clamping high-speed dental burs.

HPA009 Handpiecewe Provide Two Kind Of Head For Choice

Features:

1. Clamping force of handpiece is:20-45N
2. Noise not exceed 70dB
3. At 25-30 atmosphele pressure,350,000-400,000R.P.M(Standard Head);280,000-320,000R.P.M(Torque Head)

Triple Water Spray Handpiece

1. Push Button High Speed Handpiece M4/B2

2. Working Air Pressure:0.20-0.25MPa(0.22MPa prefrred)

3. Rotation Speed:350,000-400,000R.P.M(Standard Head); 280,000-320,000R.P.M(Torque Head);

4. Bur Applicable:Φ1.595-1.600mm"

5. Spray:Triple water spray

Advantage
1. Simple, effective, disassemble it without tools and can be cleaned thoroughly to avoiding cross infection;
2. Stale, quite, and large torque cartridge;
3. Perfect stable and reliable performance;
4. 135C Auto rotation;
5. High -grade material with a stylish design
6. Self-illumination without connecting circuit
9. Application: odontoprisis, drill teeth, teeth clean etc.

Maintenance:
1. Considering safety first, please be careful to use it with full attention.
2. Be limited to dentists who held the dental treatment qualifications.
3. Strictly forbid decomposition and reconstruction by unauthorized.
4. Please run point testing on outside of patients oral beforehand. If feel anomalies, please stop using immediately and contact with our after-sales center.
5. When appears abnormal during using, please stop it immediately and contact with our after-sales center.
6. It will cause a high noise using a center-vibration or bended bur and a handpiece of which bearing has been worn, A long time in this state will be harm to people’s hearing. Forbid using a vibration or bended bur, if appear high noise, please replace the shaft core early
7. Do not use a bending , cracking, deformation and unqualified bur. If using it, may cause a snap, or a flying off to injury accident during operation process.
8. Please ensure the bur chuck be clean. If with contaminant inside of it, may causes bur clamping weaken or shaft core vibration.
9. Please run the bur under the provision rotation-speed by bur manufacturers.
10. Do not crash, especially to avoid falling.
11. Please install a bur or a standard stick before using.
12. Aslo remember to install a bur or a standard stick when not in using.
13. Please unload the bur and handpiece when the running stopped in completely.

high speed dental drill,

dental fast handpiece