Add to Cart
TNC Right Angle Male to Female RF Connector Adapter for Communication
The TNC series represents a threaded iteration of the BNC connector, characterized by its screw-thread mating design. These compact, threaded, and waterproof units consistently maintain a 50 Ohm impedance across a frequency range extending from DC to 11 GHz. The product line includes two primary variants: standard and reverse polarity connectors. Despite being constructed from lower-cost die-cast and molded materials, these connectors are optimized for commercial use, offering reliable performance in various applications. Notably, they excel in antenna connections and are prevalent in avionics, communications, and diverse industrial sectors. Additionally, reverse polarity and 75 Ohm versions of the TNC connectors are also offered to accommodate specific requirements.
Specification
Note:The specific data of the model are based on the data in the
product specification sheet.
Electrical Characteristics | ||||
Impedance | 50Ω | |||
Frequency Range | DC~4GHz | |||
Rated Voltage | 2500VRMS (Maximum sea-level) | |||
Dielectrics Voltage-resistance | 750VRMS (Maximum sea-level) | |||
Insulation Resistance | ≥2000MΩ | |||
Contact Resistance | Outer conductor | ≤6mΩ | ||
Center conductor | ≤1.5mΩ | |||
VSMR | ≤1.3 |
Mechanical Specification
Design Standard | IEC 60169-17 |
RoHS Compliant | Yes |
Centre Contact Termination | Crimp |
Outer Contact Termination | Crimp |
Mating Cycles | 500Cycles |
Contact Retention | 10N min |
Cable Retention | 100N min |
Mating Force | 13.6N max |
Un-Coupling Force | 13.6N max |
Environmental Specification:
Operating Temperature | -30 to +70 Deg C |
IP Rating ( Mated ) | IP64 |
Features:
Reasonable structural design
1. Small and lightweight: TNC adapters are relatively compact,
small in size and light in weight, easy to carry and install
without adding too much burden to the equipment, especially
suitable for application scenarios with strict requirements on
space and weight, such as aerospace, mobile communications and
other fields.
2. Diversified models and installation methods: There are a variety
of models to choose from, including male, female, straight, curved,
panelized, through-the-wall, etc., which can meet different
installation needs and space constraints. Meanwhile, its
termination method is also more flexible, and can be installed by
card connection, welding, crimping, etc., which is convenient for
users to choose according to the actual situation.
Application:
1. Network Analyzer: In Network Analyzer, TNC adapter can be used
to connect the port of the device under test and the analyzer to
realize the RF performance test of the device under test, such as
reflection coefficient, transmission coefficient and so on.
2. Spectrum Analyzer: In Spectrum Analyzer, the TNC adapter is used
to connect the signal source under test and the input port of the
analyzer to transmit the signal under test to the spectrum analyzer
for analysis, which helps engineers to understand the frequency
characteristics and spectral distribution of the signal.
3. Signal Generator: In Signal Generator, the TNC adapter can be
used to connect the output port and the device or antenna under
test, and transmit the signal generated by the Signal Generator to
the device or antenna under test for various signal tests and
experiments.
NOTE:
We have over 10,000 types of interconnect
products((BNC,TNC,MCX,MMCX,SMA,SSMA,SMB,SSMB,BMA,SBMA,SMC,SC,SMP,SSMP
ect.),), if the connector you are using is not found, please
contact us with your details.