Mini Type Flexo Printer Slotter Machine Automatic Carton Box Slotting Forming Machine

Introduction

The machine adopts vacuum adsorption auxiliary paperboard feeding system (air volume is adjustable), with the function which can complete the slotting, angle-cutting, slitting, creasing etc. of corrugated paperboard in one time. Slotting depth of this machine is with electric adjustment, and equipped with the scale reading. Slotting phase adjustment is to the planetary gear structure, adopting the electric computer type 360 degrees adjustment, and the upper and lower slotting knife disc and creasing wheels can synchronous moving to left or right, (note: some special tool to adjust the movement), it is easy to use and maintenance, compact, which is a professional in view of the small carton slotting forming equipment .

Product Parameter

Main Structure And Function Characteristics

1. Paper feeding roller adopts patterned roller, feeding roller pressure adopts eccentric wheel adjustment with left and right eccentric wheels, can adjust the pressure synchronously .

2. Back kick feeding department adopts both sides and back baffles to fasten paperboard, to avoid the slotting error to make upper paperboard misplace when pushing paperboard, can fit to each kinds of paperboard with different quality , and sending paper stable and accurate.

Machine Operation

1. Choose the corrugated paperboard which you want to process, adjust the side feeding baffle . Adjustment method : loose the screws in circle of below picture, move the two side feeding baffles right or left , adjust the distance between two side baffles according to the length of paperboard , after finishing adjustment , tight the screw and fix the baffles .

2. Adjust the back feeding baffle , adjustment method : loose the screws in circle of below picture , move the two back feeding baffles forwards or backwards , adjust the suitable positions according to the width of paperboard , after finishing adjustment , tight the screw and fix the baffles .

3. Adjust the feeding clearance according to the thickness of paperboard : loose the screws in circle of below picture , move the front feeding baffles up and down , make the distance between bottom of baffle and feeding table is 1.5 times of the thickness of paperboard . (when feed paperboard , can make the bottom paper pass and stop the second last)

The optional adjustment part when feed the paperboard with big length or big width :

1. When the length of paperboard is big , can move the front feeding baffle (3 in Picture A) right or left. Adjustment method : loose the screws in circle of below picture, move the two front feeding baffles (3 in Picture A), adjust the front feeding baffles to the suitable positions according to the length of paperboard , after finishing adjustment , tight the screw and fix the baffles .

2. When the width of paperboard is big , need to adjust the suction range of feeding table : first put one piece of paperboard on feeding table , and make the machine in low speed condition , check the walking range of the pushing plate (the rectangle part in below picture) .

VIDEO LINK:http://www.corrugatedcardboardmakingmachine.comhttps://www.youtube.com/watch?v=V4PhayyF-6Q