12Kg Full Automatic Small Portable Commercial Ice Maker Machine , Countertop Ice Cube Machine

12Kg Full Automatic Small Ice Maker Machine , Portable Commercial Ice Maker Machine,countertop ice cube machine

More than 30 years professionally produce the high quality refrigerated products,export a lots all over the world every year. Famous brand compressor,stable excellent quality,working highly efficient in an energy-saving way.

We can supply a complete range of refrigeration equipment,including China best home refrigerator, chest freezer,beverage cooler and ice cream showcase, wine cooler, ice maker, cake showcase, kitchen refrigeration equipment, car refrigerator,absorption refrigerator and truck air conditioner etc..

Product Application:

This mini ice maker / ice cube maker / ice machine is widely used in hospitals, schools, labs, supermarkets, food preservation, fishing refrigeration, medical applications, chemical and food processing industries,bakery,grocery,bar,club,cafes, convenience stores,catering place etc. And for frozen food,such as soft drink,cafe,beverage,wine, ice cream cake, meat,seafood and so on that's to maintain a fresh state.

Full-auomatic mini potable ice maker machine/ice dispenser/ice cube maker/ice maker/ice machine

Home/commercial mini ice maker/compact ice maker machine

Commercial Refrigerator Full-Auomatic Ice Maker / Ice Making Machine / Cube Ice Maker Machine

Feature:

1. All stainless steel inner design, unique style and strong,beautiful and noble.

2. Microcomputer control system, fully automatic, less failure.water, drainage, Ice-making fully automated, easy operation.
3. World famous brand compressor,low noise,energy-saying,high efficiency vertical ice tray, ice making fast.

4. Copper condenser and evaporator.

5. Water supply:automatic

6. Stop running without either power or water.

7. Excellent appearance.

8. Unique patented siphon drainage way can make the scale not be piled up and make the ice more crystal clear.

9. Ice cube is pure, hard, compact, crystal clear and slow melting, not easy to stick the group.

10. Ice making cycle are regulated by PCB board.

11. Polyurthane high density foam process without fluoride,high heat preservation.

12. Easy to move and convenient to use.Perfect for everyday use,in home,office,camping,cafes,restaurant bars etc.

Installation instructions:

1. the refrigerating machine placement
(1) the machine should be placed in the air circulation, safe and clean place.
(2) the machine should not be placed outdoor, unfavorable under direct sunlight and rain.Not near the heat source.
(3) the use of the machine environment cannot be lower than 5 ℃, no more than 38 ℃.
(4) around the machine should have enough space, especially the back not less than 250 mm.In order to machine the cooling.
(5) please adjust the machine at the bottom of the anchor bolt to ensure smooth placed level.
2. the installation of a water system
(1) please plug in accordance with local water source of drinking water standards.
(2) connected to the filter when necessary, in order to improve the standard of drinking water.
(3) the water supply system must meet the following conditions.
A. the lowest temperature 2 ℃, the highest do not exceed 38 ℃
B. water pressure the lowest 0.02 Mpa, the highest 0.8 Mpa
3. the installation of power supply
(1) the power supply must be consistent with the machine indicated on the nameplate.
(2) all lines must be in conformity with the national standard.
(3) must be reliable grounding, grounding wire must meet the electrical standards.
(4) voltage fluctuation may not exceed the rated voltage of plus or minus 10%.

Instructions:

1. ice making process
(1) must be checked before starting the automatic water supply device is normal, the tank to save water is reasonable (the machine factory has just the water level, the user can be reset).
(2) the plug in the power supply, ice making machine began to work, first of all, the pump running, the exhaust air pump has a short process) compressor started about two minutes later, into ice making machine.
(3) when to set the thickness of the ice thickness, ice plate probe began, electromagnetic valve start to work, water pump stop working, and the heat into the evaporator, about 1.5 minutes of ice.When I fall on the ice to the ice dampers inside out and open the magnetic reed switch.When magnetic reed switch closed again, the machine into the ice making process again.
(4) the compressor in the entire process of ice and ice off, don't stop.
(5) when water ice barrel for a full, magnetic reed switch cannot be automatically closed, the machine automatically stop working, and when taken enough ice, magnetic reed switch after reclosing time delay machine start after 3 minutes, back into the ice making process.
2. the thickness of ice bridge is
(1) the thickness of the ice bridge should be about 3 mm, between the probe and the evaporator international should be thicker than the actual thickness of the ice bridge 1.5 mm or so, mouth turn adjusting screw clockwise to increase the thickness of the ice bridge (screw rotation 1/3 circle ice bridge thickness change 1.5 mm).
(2) check the ice plate probe connections and bracket, should guarantee the free rotation after each process of ice can be returned to the right place.

The cause of the problem:

FAQ:
1. Q: How about the quality?
A: We use all the best high quality raw material and professionally produce.
2. Q: Which style should we choose?
A: We have many models for your choice. Please tell us the application, materials, output and pressure all what you wanted, then we'll introduce.
3. Q: Can we have customized model?
A: Yes. We can make the customized machine according to your correct requirements.
4.Q: What should we do if there are some problems with the machine?
A: You can refers to the Operate Instruction or contact us for online instruction. Also, our engineers are available to service overseas.
5.Q: What is the delivery time?
A: 2 weeks for sample model, 30 days for customized model. It depends for mass production.
6.Q: How about the package?
A: We have plywood case to protect the machine from damage during the long-distance delivery.
7.Q :How about the payment?
A: TT, 30% deposit + 70% before shipment.

Lanco Industry Co. Ltd was incorporated in HK in 2006, and have four production bases located in Guangzhou and HeFei. We are dedicated on refrigerator, wine cooler, chest freezer and showcase for international market with more than 20 years experience. With years of hard work, we are becoming a professional provider on refrigeration product solutions and sell the products to more than 100 counties and regions all over the world.

Our factories are equipped with the high production equipment and testing facilities with qualified engineers and highly trained technical staff, which promotes our business growing up stably year by year. We have more than 200 items in our product range from freezers, refrigerators, wine cellars, showcases, and ice makers both in home and commercial. The capacity from 50L to 2000L can meet all kinds of requirement in the markets. The production capacity is 1 million in Guangzhou bases focusing on commercial refrigerator and 3 million in Hefei bases focusing on home refrigerator from mini bar to big refrigerator Side by Side, French and Multi doors etc.

We always have been investing on R&D, products and quality controlling and there are many new models are developed to meet the changeable requirements of our customers every year. The products have passed CE,CB,SASO, CSA/ETL,G-MARK, SAA,S-MARK and other international certificates and they have been creating high value to the customers due to superior quality.

We are committed to OEM and ODM business and cooperate with our partners together to develop the market and create the value to achieve win-win result.