Open Circulation SS304 Powder Industrial Spray Dryer Machine
Brand Name:XINYU
Model Number:LPG300
Minimum Order Quantity:1
Delivery Time:40
Place of Origin:CHINA
Supply Ability:20
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
Floor 3rd, Building 12th, No.100th, Dongwei Road, Dongjing Town, Songjiang area ,Shanghai China
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
Energy Saving Stainless Steel Tomato Centrifugal Spray Dryer
Equipment design conditions
Name of material:
Solid content:About 45-50%
Final moisture content:≤5%
Inlet air temperature:180-200℃
Exhaust temperature:90-100℃
Rotating speed frequency:40-50HZ
Drying tower diameter:ф4600 mm
The atmospheric pressure: 760mmHg
Ambient temperature:25℃
Absolute humidity:90%
Power supply:380V,3Phase,50hz
Working principle of centrifugal spray dryer
The air passes through the filter and heater and enters the air
distributor on the top of the dryer. The hot air enters the dryer
evenly in a spiral shape. The material liquid is pumped from the
material liquid tank through the filter to the centrifugal atomizer
of the dryer, so that the material liquid is sprayed into very
small mist droplets. The material liquid contacts the hot air in
parallel, and the water evaporates quickly. It will be dried into
powdery finished product within time. The finished product is
discharged from the bottom of the drying tower and the cyclone
separator, and the exhaust gas is discharged by the fan.
Benefits
1. Stainless steel material, arc corner design and polyester powder
coated shell, prevents corrosion of acidity and alkaline air
effectively.
2. Imported Schneider electrical components which is more
stability.
3. PLC control system, make your research more easier and
efficient.
4. Build in oil-free air compressor, without any noise.
5. Self-priming peristaltic pump, avoid secondary pollution, make
sure whole process conducted steady and smoothly.
6. Narrow size distribution, more than 95% of the dry powders are
in the same range of particles.
7. Innovative tower wall purging device, improves the material
recycling rate.
8. High speed of drying, after spraying of the material liquid, the
surface area of material will be increased greatly, make your
research more efficient.
9. In the hot-air flow, 95%~98% of water can be evaporated at a
moment. You can finish material drying only in several seconds.
10. Especially suitable for drying the heat sensitive materials,
after drying, there's no need for smashing and sorting, so as to
reduce the operation procedures and save your time.
Equipment technical parameter table
| Water evaporation | 300Kg/h(max) | Tower diameter/tower height | 4.60M/10.5M |
| Operating temperature | Inlet Temperature 200℃/Outlet Temperature 90℃ | Atomizer LPG-300 | Speed:14000r.p.m Diameter:180mm |
| Power | Drive 70KW | ||
| Oil consumption | 50-60kg/h | System heat | 50X104Kcal/h |
| Pressure air consumption | 0.5m3/min | System air volume | About 12000 m3/h |
| Drying system type | Open circulation system | Feeding mode | Automatic screw pump stable feeding | ||
| Hot air contact mode | Parallel flow mode | Heat source mode | Oil-fired hot air stove | ||
| Product collection mode | Cyclone+water film | Atomization mode | Centrifugal atomization | ||
| Control mode | Arbitrary setting, automatic control of inlet air temperature, digital display temperature, pressure, pressure difference, frequency conversion to adjust atomization speed, etc. Touch screen display work flow / PLC fuzzy control variable parameters and so on | ||||
| Overall Size | See the ref picture | Weight | 12T | ||
| Environment condition | Full pressure:760mmHg,Temperature200C,Relative humidity:80% | Electric source | 3Phase,380V,50HZ | ||
Process flow diagram
Open Circulation SS304 Powder Industrial Spray Dryer Machine
Inquiry Cart
0