WQ-2121 Styrene Acrylic Copolymer Emulsionv For Inks And Aluminized Varnishes
Brand Name:WeiLi Resin®
Certification:ISO9001
Model Number:WQ-2121 and WQ-2190
Minimum Order Quantity:5000KG
Delivery Time:14 work days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Xiamen Fujian China
Address:
GOLDEN BAY WEALTH CENTER, HULI HI-TECH PARK, XIAMEN, CHINA
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Styrene Acrylic Copolymer Emulsion Translucent Milky White Liquid
WQ-2121 and WQ-2190 Special Acrylic copolymer emulsion for primer of foil
Product Introduction
WQ-2121 and WQ-2190 acrylic polumer emulsion produced by our company are mixed according to a certain ratio ( the ratio of WL2121 and WL2190 is recommended to be 2:1). Mixed emulsion is recommended for the following,
- ApplicationsHeat-seal lacquers including primers for film & foil
- Pre-metallization primers for vacuum metalized paper substrates used in tobacco packaging and paper labels.
- Pre-print primers for hard and soft aluminum with excellent heat resistance.
- Print-primers for aluminum yogurt lidding providing heat and chemical resistance.
WQ-2121 and WQ-2190 are used for flexographic and gravure water-based varnishes and inks; aluminized varnishes, wine labels and other varnishes, meeting the requirements of cigarette pack VOC standards. WQ-2121 and WQ-2190 are used to make flexo, gravure water-based varnish, ink, aluminized varnish, wine label, etc. Varnish.
Physical Property:
| WQ-2121 | |
| Solid content % | 46±1 |
| Viscosity at 25℃,cps(Brookfield, LVT No.4,60 RPM ) | 700-800 |
| Ph Value | 8.0-8.5 |
| Apperance | Translucent milky white liquid |
| Acid value | 50 |
| MFFT(℃) | +14 |
| Tg,℃ | +21 |
| WQ-2190 | |
| Solid content % | 45±1 |
| Viscosity at 25℃,cps(Brookfield, LVT No.4,60 RPM ) | 700-800 |
| Ph Value | 8.0-8.5 |
| Apperance | Translucent milky white liquid |
| Acid value | 50 |
| MFFT(℃) | >90 |
| Tg,℃ | +100 |
Storage Condition
- The product should be stored in an airtight container to avoid freezing and high temperature. When possible, it should be used within six months. Recommended normal storage temperature is 10-35°
Special Tips
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only.
WQ-2121 Styrene Acrylic Copolymer Emulsionv For Inks And Aluminized Varnishes
Inquiry Cart
0