Add to Cart
1- Garbage Compactor Truck is divided into compactor garbage truck,
swing arm garbage truck, hook lift garbage truck, roll on roll off
garbage truck,bin lift garbage truck,dumper garbage truck,sealed
garbage truck,container garbage truck, rear load garbage truck and
so on.
2--Easy Full Automatic Operation of Garbage Compactor Truck :
computer control system for loading and unloading operations.
3--One Person Operation: Reducing sanitation working, greatly
improves the working environment.
4--Double Operation System of Garbage Compactor Truck : computer
control system and manual operation greatly improves the vehicle
usage rate.
5--Capacity of Garbage Compactor Truck : option for 3-20m3 garbage
truck,optional for loading capacity from 1ton to 18tons
6--Steering wheel of Garbage Compactor Truck : right hand drive or
left hand drive
7--Emission standard of RGarbage Compactor Truck : option Euro
1,Euro 2,Euro 3,Euro 4,Euro 5 rear loader truck
8--Truck chassis of Garbage Compactor Truck: option for japanese
and chinese brand,such as
dongfeng,isuzu,faw,foton,howo,jac,jmc,forland...
The main advantages of Garbage Compactor Truck:
1) The collection method is simple: change the dirty and old
appearance of garbage cans all over the streets in the city, and
prevent secondary pollution.
2) High compression ratio and large loading capacity: the maximum
crushing pressure is 12 tons, and the loading capacity is equal to
two and a half times of the same ton of non-compressed garbage.
3) Operation automation: Imported computer control system is
adopted, and all loading and unloading operations require one
driver to operate, which not only reduces the labor intensity of
sanitation workers, but also greatly improves the working
environment.
4) Good economy: When the special equipment is working, the
computer control system automatically controls the throttle.
5) Dual insurance system: The operating system has dual functions
of computer control and manual operation to ensure safety and
increase vehicle utilization.
6)Turning mechanism: optional turning mechanism with trash can (or
bucket), rear swing arm turning structure, large floor bucket
turning structure.
Feature
1--garbage truck is divided into compactor garbage truck, swing arm
garbage truck, hook lift garbage truck, roll on roll off garbage
truck,bin lift garbage truck,dumper garbage truck,sealed garbage
truck,container garbage truck, rear load garbage truck and so on.
2--Easy Full Automatic Operation: computer control system for
loading and unloading operations.
3--One Person Operation: Reducing sanitation working, greatly
improves the working environment.
4--Double Operation System: computer control system and manual
operation greatly improves the vehicle usage rate.
5--Capacity of rear loader compressed garbage truck : option for
3-20m3 compressed garbage truck
6--Steering wheel of rear loader compressed garbage truck : both
left and right hand drive,meet the needs of different countries
7--Emission standard of compressed garbage truck : option Euro
1,Euro 2,Euro 3,Euro 4,Euro 5 compressed garbage truck
8--Truck chassis of compressed garbage truck : option for japanese
and chinese brand,such as
dongfeng,isuzu,faw,foton,howo,jac,jmc,forland...
Recommended configuration: | Vehicle Model | ZZ1255N5846D1 | ZZ1255N5846D1 | ZZ1255N5846D1 | |
Engine | model (Euro IV) | MC07.34-40 340HP MAN brand with EVB | D10.38-40 380HP SINOTRUK brand with EVB | D10.38-40 380HP SINOTRUK brand with EVB | |
Economic rpm range (r/m) | 1200~1800 | 1200~1500 | 1200~1500 | ||
Most economic rpm (r/m) | 1000~1500 | 1000~1300 | 1000~1300 | ||
Displacement | 6.87L | 9.726L | 9.726L | ||
Cabin | H16 / H17 / H18 single sleeper/double sleeper, equip with air-condition, safety belt, electric lifting cabin, wind deflector. | ||||
Clutch | Φ430 pull-type diaphragm clutch | ||||
Transmission | HW12 / HW10 12/10 front and 2 reverse, manual gearbox SINOTRUK HW series Transmission, main and auxiliary transmission structure, main transmission with double counter shaft, auxiliary transmission with planetary reduction. | ||||
Drive Axle | MCY13 MAN brand 13ton,central single stage reduction | ST16 SINOTRUK brand 16ton central reduction and hub reduction | HC16 SINOTRUK brand Mine with 16ton central reduction and hub reduction | ||
Speed ratio | 3.7 , 4.11, 4.63 | 3.93 , 4.42 , 4.8 | 4.42 , 4.8, 5.73 | ||
Front Axle | VGD060QB MAN brand, 6.5ton,drum brake & disc brake | HF7 SINOTRUK brand, 7ton,drum brake & disc brake | HF9 SINOTRUK brand, 9ton,drum brake & disc brake | ||
Frame (mm) | 300x80x(8+5) | 300x80x(8+8) | |||
Chassis suspension | Multiple-leaf spring in front and rear | ||||
Steering | ZF, power steering with hydraulic system | ||||
Tyre | 11.00R20 with ABS | ||||
Fuel tank | 400L | ||||
Breaking system | service brake: dual-circuit air pressure brake; parking brake: spring storage energy without air; auxilliary brake: Engine exhaust braking. | ||||
Electronic system | voltage:24V;generator:1540W;starter:24V,7.5kw;battery:12V/165Ah,2pieces | ||||
Box | length | 9600 / 9700 mm | |||
type | wing van, refrigeration, container, stake and so on | ||||
material | Aluminum, steel | ||||
Other | With water device | ||||
Operating condition environment: | Total mass(vehicle+cargo) | ≤50 T | 50-70 T | ||
Carried cargo | Coal, rocks, building materials, decoration materials, bulk cargo, farming products, fresh food hazardous chemicals, etc | ||||
Type of carrying distance | Short, medium and long distance | ||||
Theoretical vehicle speed upon max. gear (km/h) | 120 | 135 | 106 | ||
Economic vehicle speed range (km/h) | 56-101 | 67-101 | 51-79 |
Pre sale service
--- Technical communication with engineer
--- Factory and workshop visit
--- Designed drawings
After Sale Service
--- Overseas installation and commissioning
--- Overseas and spare parts support
--- Technical and spare parts support
Truck According to your request, choose good chassis and refit it to truck. Upper Body Customization Spare Parts on trucks as tank and box. |
Q1: What kinds of garbage trucks I can order from your company?
A: There are various sizes and types of garbage trucks with
different functions,you can contact us and tell your request.We
will recommend you suitable product.
Q2:: Have you supplied garbage truck to any overseas companies?
A: Yes,with need of garbage waste transport,we offered garbage
trucks to many Africa and south-east Asian countries.
Q3 What about warranty of garbage truck?
A: Equipment warranty is 12 months from the date on which the
equipment is applied successfully into operation, or 13 months from
the date on which the equipment has been delivered, whichever comes
first.
Q4: Where is your factory? How far from Shanghai to your factory?
A: Our factory based in Suizhou city, Hubei province, China. Our
overseas marketing office in Wuhan. Wuhan is two hours' plane from
Beijing,Shanghai or Guangzhou city,welcome to visit us for factory
inspection.
Sales Director
Hubei Chengli Special Automobile Co., Ltd.
Hubei Weiyu Special Vehicles Co., Ltd.
Factory:Chengli Automobile Industry Park,Suizhou City,Hubei
Province,China
Office:Room 2614-2615,Block B,Longyang Time Square,Hanyang
District,Wuhan,China
Mobile:+86-135 4506 4324(whatsapp)