Add to Cart
0.6/1KV XLPE Insulated 4/4+1 Multi-core SWA STA Electric Armoured
Underground PVC Power Cable IEC60502-1
Applications:
The armoured cables are most suitable for underground burial since the cable is very suitable for mechanical compulsion and harsh operating conditions. Such as high rise buildings and apartments, airports, shopping centres, cinemas and road and rail tunnels.
Standard:
Basic design to IEC 60502-1, IEC 60228,BS EN 60228
China: GB/T 12706.2-2008
Other standards such as BS7870,DIN and ICEA upon request
Construction:
Conductors:Copper or Aluminium conductor, round standed or Shaped,
Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round
conductor, Class 1 as per IEC 60228, BS EN 60228 can also be
supplied upon request.
Noted: Insulation color as per standards or customer requirement.
Certificates:
CE, ROHS,KEMA and more others at request
Insulation:
PVC Insulation material and thickness shall be as per IEC 60502-1
and BS 6346. PVC material shall be Type A as per IEC 60502-1 or TI1
as per BS EN 50363.PVC Insulation material as per SASO 1694 rated
for 85°C continuous operation is also available upon special
request.
Colour Code Colour Code (1):
1 Core: Red or Black; 2 Cores: Red, Black; 3 Cores: Red, Yellow,
Blue; 4 Cores: Red, Yellow, Blue, Black; 5 Cores: Red, Yellow,
Blue, Black, Green; Above 5 Cores: Black Cores with White numerals
Assembly /Inner Sheath:
Two, three , four or five insuated conductors are laid up together
if necessary filled with non-hygroscopic material compatible with
the insulation and covered with a layer of PVC bedding which maybe
an integral part of the filling. In case of non- armoured cables,
this layer may be omitted
Armour: Aluminum/Galvanized Steel Wires applied helically over the
bedding as per IEC 60502 or as per BS 5467, BS 6346. Single core
cables shall be Aluminium wire armour. Aluminum/Steel Tapes applied
helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath: Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1
or Type 9 as BS 6346/5467.Special type of PVC sheathing material
such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC,
Sunlight resistant PVC, Oil Resistant PVC are available on special
request. Also, special sheathing materials such as LLDPE, MDPE,
HDPE, LSF, CPE are available on request.
Fire Performance of Cable Sheaths: Cables can be supplied with special flame retardant PVC outer
sheath to comply with the flame test requirements of IEC
60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply
cables with Low Smoke Halogen Free (LSHF) material according to IEC
60502-1, BS 7211, BS 6724 or other equivalent standards.
Cable Parameters:
Cross Section | Stranding | Approx Weight | Approx Overall Diameter | Gland Size | Single Cleat | Nom. Max. DC-resist conductor 20° C | Current rating laid direct |
(mm²) | (mm) | KG/KM | (mm) | (mm) | (Ohm/km) | (Amp) | |
4 x 1.5 | 7/0.53 | 351 | 12.88 | 20 | 0.5 | 12.1 | 32 |
4 x 2.5 | 7/0.67 | 429 | 14.43 | 20 | 0.6 | 7.41 | 42 |
4 x 4.0 | 7/0.85 | 538 | 16.87 | 20 | 0.6 | 4.61 | 55 |
4 x 6.0 | 7/1.04 | 670 | 17.87 | 20 | 0.7 | 3.08 | 69 |
4 x 10 | 7/1.35 | 998 | 20.1 | 25 | 0.8 | 1.83 | 92 |
4 x 16 | 7/1.70 | 1,272 | 22.4 | 25 | 0.9 | 1.15 | 119 |
4 x 25 | 7/2.14 | 1,940 | 27 | 32 | 1 | 0.727 | 152 |
4 x 35 | 7/2.52 | 2,390 | 30.1 | 32 | 1.2 | 0.524 | 182 |
4 x 50 | 19/1.78 | 2,925 | 31.5 | 32 | 1.4 | 0.387 | 217 |
4 x 70 | 19/2.14 | 4,200 | 37.4 | 40 | 1.6 | 0.268 | 266 |
4 x 95 | 19/2.52 | 5,355 | 40.9 | 50 | 1.8 | 0.193 | 319 |
4 x 120 | 37/2.03 | 6,925 | 46.6 | 50 | 2 | 0.153 | 363 |
4 x 150 | 37/2.25 | 8,200 | 50.2 | 50 | 2 | 0.124 | 406 |
4 x 185 | 37/2.52 | 9,975 | 55.8 | 63 | TC9 | 0.0991 | 458 |
4 x 240 | 61/2.52 | 12,700 | 62.5 | 63 | TC10 | 0.0754 | 529 |
4 x 300 | 61/2.85 | 15,275 | 67.4 | 75 | TC11 | 0.0601 | 592 |
4 x 400 | 61/3.20 | 19,875 | 77 | 75 | TC12 | 0.047 | 667 |
Productos show:
Why Choose Us:
FAQ
1. Is your company a factory or a trade company?
Factory, more than 20 years in China
2. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our
quality. Sample is free, but the freight charge should be paid.
3. What are your payment terms?
We normally accept T/T 30% deposit, 70% balance before delivery as
the main payment terms, and other payment can also be negotiated.
Trade assurance on Alibaba is also available.
4. What’s the delivery time?
Sample order needs 3~5 days. Formal order depends on the quantity.
Usually it needs 7-30 days after get your payment.
5.Can I get a discount?
It depends on your quantity, We can make a discount and afford the
freight. Pls kindly contact us.
6. Does your company accept OEM production?
Yes, could print your company name, we even custom the quality card
to promote your company.