Nominal Section：4*1.5~4*400mm² 0.6/1KV LV 4C Power Cable , XLPE Insulated (Armoured) （CU/XLPE/LSZH/DSTA/NYBY/N2XBY）

Nominal Section:4*1.5~4*400mm² 0.6/1KV LV 4C Power Cable , XLPE Insulated (Armoured) (CU/XLPE/LSZH/DSTA/NYBY/N2XBY)

Description:
0.6/1KV XLPE Insulated Cables (Armoured)
IEC60502,IEC60228,GB/T 12706.1-2008
CE,CCC,KEMA,ISO

Construction:
Conductors:Copper or Aluminium conductor, round standed or Shaped, Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round conductor, Class 1 as per IEC 60228, BS EN 60228 can also be supplied upon request.

Noted: Insulation color as per standards or customer requirement.

Application:
These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.

Standard:
Basic design to IEC 60502-1, IEC 60228,BS EN 60228
China: GB/T 12706.2-2008
Other standards such as BS7870,DIN and ICEA upon request

Certificates:
CE, ROHS,KEMA and more others at request

Insulation:
XLPE material and thickness shall be as per IEC 60502 or BS 5467 rated for 90°C continuous operation.

Colour Code Colour Code (1):
1 Core: Red or Black; 2 Cores: Red, Black; 3 Cores: Red, Yellow, Blue; 4 Cores: Red, Yellow, Blue, Black; 5 Cores: Red, Yellow, Blue, Black, Green; Above 5 Cores: Black Cores with White numerals

Assembly /Inner Sheath:
Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted.

Armour:
Aluminum/Galvanized Steel Wires applied helically over the bedding as per IEC 60502 or as per BS 5467, BS 6346. Single core cables shall be Aluminium wire armour. Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.

Outer Sheath:
Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.
Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSF, CPE are available on request.
Fire Performance of Cable Sheaths:
Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.

Cable Parameters:
Four Cores Power Cable (Armoured)

Why Choose Zhenglan Cable:

• OEM/ODM services provided;
• Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards; Customer standard requirments Accepted;
• Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
• Registered capital of $30 million and factory covers an area of 60,000㎡;
• Advanced test equipment and procedures, 100% inspection before factory;
• Enough stocks and the higest efficient shipping time guarranteed;
• Professional pre-sales and after-sales services provided.

A Professional Manufacturer of Wires and Cables
—Zhenglan Cable Technology Co. Ltd, formerly known as Henan Zhengzhou Cable Co. Ltd, is one of the largest ­scale backbone enterprises in China's wire and cable industry. Our company's registered capital is about $32 million and our headquarters is located at the 49th floor of the South Tower of the Greenland Center, Zhengzhou New District (Twin Towers). Our factory is located in Zhengzhou Cable Science and Technology Industrial Park of the Wuzhi industrial area.

Our main products are nine major categories, 10 product series and 60 varieties, including all kinds of bare wires, power cables (cross-linked cables, plastic cables and more) special cables (fire retardant, fire resistant, low smoke and halogen free cables), control cables, overhead insulated cables, home use wires and others.

Wide Product Range to Choose From
Our company is specialized in conductors such as All Aluminium Conductors (AACs), All Aluminium Alloy Conductors (AAACs), Aluminium Conductor Steel Reinforced (ACSR), Aluminium Conductor Aluminium Clad Steel Reinforced (ACSR/AW), All Aluminium Alloy Steel Reinforced (AACSR), Aluminium Conductor Aluminium Alloy Reinforced (ACAR), Aluminium Clad Steel Strands (ACSs) and Galvanized Steel Wire Strands. We can also supply Aerial Bundled Cables (ABC cables), PVC insulated wires and flexible wires, PVC insulated power cables, XLPE insulated power cables, general rubber sheathed flexible cables, mining cables, welding cables and control cables.

Meeting International Standards
Our products are produced in strict accordance with national standards (GB), and can be produced in accordance with IEC, CCITT, British BS, DIN, JIS, ASTM and NF production, but also according to customer's requirements for non-standard cable product design and manufacturing to meet different customer's needs. Contact us today to begin sourcing.

The Department of Quality Inspection
We have not only a team of QA, but also advanced equipment which are used to test. The QA team is responsible for the quality inspection of the products of the whole company. Mainly responsible for the control of the inspection, measurement and test equipment to make products meet the required requirements and our customer's special needs.

OEM and ODM Services are Welcome
We are a professional OEM and ODM supplier.

• As a OEM supplier: whatever of the cable you need, Zhenglan Cable can provide a bespoke solution cable to meet your particular requirements. Meanwhile, we'll keep it confidential.
• As a ODM supplier: there is a team of design and development, and technicians.

Once we confirmed the detail information of products, we will arrange ASAP. Contact us today to begin sourcing.