Storage Type OEM Pressure Sensor Anti - Interference PT218 For Oil Industry

OEM Pressure Sensor PT218 Storage Type Pressure Sensor For Oil Industry

Introduction

PT216 Storage type pressure gauge is a pressure sensor can measuring pressure and temperature same time with data storage instrument. 1200 million the data collection and storage, use the built-in memory and external memory card design, storage and backup double at the same time; Read data, USB communication and supporting software, software of data collection, analysis, report forms and curve display to give you an efficient data processing; Six figures very eye-catching; this series pressure sensor is the experiment data acquisition essentials.

Main features

Ⅰ, 11 kinds of unit display; Customizable.

Ⅱ, Acquisition speed (0.025 ~ 7200 )s/time; Free setting

Ⅲ, Storage and backup controlling double insurance; Safe and reliable

Ⅳ, More than 1200 million data storage, storage density can be divided into 10 section programming

Ⅴ, Buttons for magnetic induction pen design; anti-interference, not easy to damage

Ⅵ,Intuitive pressure bar charts; Intuitive and easy to understand

Ⅶ, Signal isolation technology; Electromagnetic resistance, power frequency interference technology; To ensure that the data is correct.

Ⅷ, Zero since the stabilizing technology; Automatic temperature compensation technology; Stable and reliable

Applications

1.Oil and gas pressure data collection and storage, analysis.

Urban water network, heat supply network and gas network pressure data 2.collection and storage, and analysis

3.Laboratory tests and analysis

4.Meet the demand of industry measuring instrument testing standards

Precision reached a magnitude of 0.05

5.Meet the demand of high precision pressure acquisition

6.Meet the demand of industry measuring instrument testing standards

Technical parameters

1. The measuring range:

Gage pressure: (-100kpa~0~1kpa~260 mpa )(optional)

Differential pressure: (0~500pa~3.5MPa)(optional)

Absolute pressure: (0~10 kpa~50 mpa) (optional)

2. The level of accuracy:.0.05% FS 0.1% FS 0.2%FS.

3. The acquisition speed: 1~30 seconds/time

4. The display mode: 6 figure dynamic display, the percentage bar charts

5. Storage medium: built-in memory, and external SD card, (mini SD card)

6. The built-in power supply: 3.6 Vdc high-energy industrial lithium battery (renewable)

7. Overload pressure: 1.5 ~ 3 times of range, depending on the measurement range

8. Medium temperature: - 40 ℃ ~ 180 ℃

9. The working environment: - 30 ℃ ~ 70 ℃, humidity < 90%

10. Explosion-proof marks: ExiaIICT6

11. Process interface: M20 x 1.5 (male)customized or according to user requirements

12. The configuration Software: Software storage table special Software

The battery working time

Test conditions:

1. Open the SD card storage, storage interval as 1 second;

2. Internal storage space for 1 second.

Note: the battery life is affected by instrument working environment, such as temperature, humidity, etc.

Use one-off high-energy lithium batteries, The model is AtechB2161.

Nominal capacity (with 3mA~2A) : 19000 mAh

Rated voltage: 3.6 V

Battery temperature: 55 ℃ ~ 85 ℃

Vibration resistance: conform to the severe degree of vibration level V.S. 3.

A set of products include: measuring probe, store display instrument, two SD card, a set of software. A piece of the battery

Dimensions of pressure sensor

Software interface

Storage display section

Placed in memory SD card at storage. need to read data as long as change SD card, card reader on the computer with a special software can read, software can also analyze the data, and interpretation. Data can also be imported into Excel form for recording.

Atech sensor co,. Ltd. specializes in sensor production and sales. The main products includes pressure sensor and transmitter, Level transmitter ,wireless pressure sensor, wireless level transmitter, ultrasonic sensor.

As manufacturer, based on technology innovation, good production capacity and strict quality control, we can meet different customers' OEM and ODM demands.

As a manufacturer and exporter, we provide the best products with our rich experience for customers.

Atech sensor is 100% vertically integrated with engineering, manufacturing, sales & marketing and customer service all supported from within our one facility. All critical components and steps in the manufacture, assembly and testing of a Atech pressure instrument are in our hands and are carefully monitored to ensure that we meet your critical specifications precisely and consistently.

Atech sensor has sold our sensors to global customers over 100 countries with the continuous efforts of the international sales. In North America, South America, Europe, Asia, Africa and Oceania, our pressure sensors and transducers are working well in the local environment and help clients to measure and control the fluid gas and liquid.

In Atech sensor, both sales team and engineer team will work with you together to figure out the most suitable solution according to your requirements. Just feel free to contact us, we are ready to help.

Best Value = High Quality Product + Competitive Price + Professional Service + Fast Delivery + Long time Insurance