CE Pit Type Electric Heat Treat Furnace Salt Bath Furnace Rated Temperature 650℃

Pit Type Electric Heat Treat Furnace Salt Bath Furnace Rated Temperature 650℃

Company Introduction

Wuxi Wondery Trading Co., Ltd is a comprehensive furnace supplier.
We can supply the following products: box type furnace, bogie hearth furnace, hot air circulation oven,well type furnace, hood type furnace, tube type furnace, mesh belt furnace, continuous type roller type, continuous roller hearth furnace, tiltable roller furnace, push rod furnace, steel strip furnace, aluminum alloy quenching furnace, aging furnace, brazing furnace, laboratory furnace, crucible furnace, and aluminum melting and holding furnace.
The heat treatment furnace treats the workpieces under protective atmosphere, control atmosphere, or vacuum status and with energy mediums such as electricity, natural gas, coal gas, industrial fuel oil and others.

Purpose of Electric Heat Treat Furnace heat treat furnace

The resistance salt bath furnace is a batch type furnace used for the heat treatment of metal parts, such as cyanidation and tempering

Technical Parameters of Electric Heat Treatment Furnace heat treat furnace

Electric Heat Treat Furnace Working Condition

1. indoor use only;

2. There is no conductive dust, explosive gas or corrosive gas that can seriously damage metals and insulation;

3. No obvious shaking or jolting;

4.The workshop needs fire fighting and smoke exhaust facilities.

Electric Heat Treat Furnace Structure

The furnace is comprised of furnace shell, furnace l and temperature control system.

Furnace shell

The furnace shell is welded by U-steel and angle steel. The external plate of shell is made of Q235 steel,

which has the feature of solid, reliable, good overall strength and not easy to deform.

Muffle tank

The side plate of muffle tank is made of 6mm 316L stainless steel plate.

It is used to prevent the molten salt infiltration into insulation layer and muffle tank.

When the salt muffle tank is damaged, it can be lifted out for repair.

Heating element

The heating element adopts 0Cr25Al5 alloy resistance strips to be wound into sprail type.

The heating element is arranged in the side wall.

Cooling system

The stainless steel pipe is arranged around the muffle tank and the furnace bottom.

The material of steel pipe is 1Cr18Ni9Ti,￠22×2.5mm. A manual ball valve is installed at the water inlet to control the water flow.

The water outlet is a screw connection easy for further connection with the water pool.

Control system

The main control cabinet adopts GGD vertical type combined cabinet.

The electrical control panel is comprised of ampere meter, voltmeter, temperature controller, temperature recorder and control switches.

eat treatment furnace

heat treatment furnace