Wireless Transmission Underground Cable Fault Indicators With LED Flashing Lights

Brand Name:Tianyihongda
Certification:type test report
Model Number:TYHD-2
Minimum Order Quantity:1set
Delivery Time:3000 sets within 1 week
Payment Terms:Western Union, L/C, T/T
Contact Now

Add to Cart

Site Member
Location: Beijing Beijing China
Address: Room1301, Building 11, yard 88 , Sanluju Road, Fengtai District, Beijing, China
Supplier`s last login times: within 12 hours
Product Details Company Profile
Product Details

TYHD-2 panel type fault indicator(be called indicator for short below) is mainly used for switch gears for locally indicate short circuit fault and earth fault and also provide wireless signal output .

Working principle:

The principle is micro-controllers with little power consumption, micro-controllers can automatically identify fault signals from short circuit indicator and earth indicator, They can display the fault signals using LED flashing lights on the spot and output the signals by wireless.

Installing methods:

The appearance of the indicator :

Method of installing:

L1 connects with A phase for signal input from optical fiber

L2 connects with B phase for signal input from optical fiber

L3 connects with C phase for signal input from optical fiber

L4 connects with Earth line for signal input from optical fiber

Fault indicate function:

The lights on the L1,L2,L3,and Earth buttons will flash with a an interval of 4 seconds,if the short circuit fault or earth fault occur.This can be reset automatically according to the time delay set before delivery from the factory or manually reset by pressing button of “Reset/Test”.the status of low battery capacity of the indicator can be uploaded by wireless,in the meantime, The indicator will flash for low battery voltage(with 4 seconds of interval).

Reset/Test function:

1) Reset: press lightly the “Reset/Test” button slightly, it will reset after all lights on in indicator

2)Self-checking

3)L1,L2,Wireless function self-checking

4)indicator address configure

Performance index:

1.The distance of fiber communication:Typical value:5m

2.Battery can be changed

Test function:

Self-checking:

Press ““Reset/Test” button, press on L1 and L2 in turn, then let go, after all lights are on at mean time once, the corresponding address lights is on. In 10s, corresponding address lights are on again, then self-checking finished.

instructions is as following table:

Addressblack point means the corresponding LED is on
L1(1)L2(2)L3(4)E(8)
1
2
3
4
5
6
7
8

There is type test report for it, test items as following:


Type Test Items


1. appearance and structure 2.function 3. electrical device performance 4.low temperature performance 5.high temperature performance 6.alternating temperature humidity7.vibrationendurance 8.incline drop test 9. electrical device life 10. static electricity and elecro-discharge immunity test 11.radio frequency electromagnetic field radiated immunity test 12.surge impact immunity test 13. power frequency magnetic field immunity test. 14. Adjacent interference test 15.short-circuit withstand impact test 16. fire hazard test 17. power consumption test 18. protection grade test 19. gripping strength test of grip structure.
China Wireless Transmission Underground Cable Fault Indicators With LED Flashing Lights supplier

Wireless Transmission Underground Cable Fault Indicators With LED Flashing Lights

Inquiry Cart 0