DPL Series Laser Diode Pump Module Drive DPSS Laser Systems With Unified Beam

100 watt Output Power Laser Diode Pump Module with Unified Beam

DPL Series modules from HTOE are the ideal engines to drive DPSS laser systems. With a variety of rod diameter, rod length and diode bar count options, these gain modules have served to be used in both resonator and amplifier designs. DPL Series provides CW output powers from 50 watt to 300 watt range, and special designs according to customers’ unique demand. HTOE has the ability to provide more than 1000 watt products.

Principle

Side pumping is a technique of optically pumping a laser gain medium (usually of a solid-state laser), where the pump light is injected from the side, i.e. in a direction which is roughly perpendicular to that of the laser beam. For example, Figure 1 shows a side-pumped rod, where pump light from diode bars is injected through slits in an otherwise reflecting outer surface around a laser rod. Figure 2 shows a laser setup containing a side-pumped rod. An alternative approach is pumping along the laser beam (→ end pumping).

Figure 1: Side-pumped rod of a solid-state laser.

The key advantage of side pumping is that it allows the use of pump sources with very low spatial coherence, such as arc lamps or high-power diode bars. Also, side pumping makes it easy to combine multiple pump sources. It is possible e.g. to pump a rod laser with several diode bars (side-by-side) which have fast axis collimation only; the total width of the emitting region can approach the rod length. Another advantage is that the absorbed pump power can be smoothly distributed in the longitudinal direction. For such reasons, side pumping is often used for high-power solid-state lasers.

Features

• DPSS Nd:YAG Laser Module
• High output power 100W
• Unified beam
• High efficiency
• 10000 hours lifetime

Parameters(20℃)

Package Information

100W(unified beam)

Function Curve

The curve data are measured under the following test conditions: Cavity length 450mm, output mirror transmission 20%, while operating temperature 20℃.

100W(unified beam)

Notice

1. For more information, please contact Hi-Tech Optoelectronics Co., Ltd.
2. The above function curves are for reference only, please see the test data attached to the module as criterion.

Hi-Tech Optoelectronics Co., Ltd. is a wholly-owned subsidiary of CECEP, is a high-tech enterprise established on the basis of National Optoelectronic Engineering Research Center.

• Established in 1999
• Registered Capital：227 million RMB
• Located in Shahe Industrial Park, Beijing
• Employees：~180
• Products: Semiconductor Lasers

Headquarter in Beijing：

• Over 3000m² of manufacturing space, and more than 1500m² clean room with class 1,000 and 10,000 ；
• The new factory planned with 11,000m², and under construction now.

R&D Platform

• National Optoelectronic Engineering Research Center
• Post-doctoral Research Center
• Engineering Technology Research Institute Optoelectronics Branch of China Energy Conservation Group

More than 30 core patents：

• Ep-Wafer Structure Design
• COMD control
• Electrode process
• Chip process
• Chip packaging
• Beam shaping
• Fiber coupling

Leading provider of laser diodes and laser-based solutions in China.