

Add to Cart
Color:Full Color RGB
LED Quantity: 60 leds per meter
Size: 1000*12*2.5(mm)
View angle:120°
Working Input Voltage: DC5V
Drive Mode:Constant Voltage
More options: APA107 5050 30led/m, APA107 5050 72led/m ,APA107 5050
144led/m
Even APA107 WWA digital white 1800-7000K
APA107 digital Pure white(warm white,nature white,and white)
APA107 RGBW 4CH addressable RGBW 4in1 led strip
APA107 is a new type of 3 wire IC for color dimming,the SK6812
integrated SMD LED is good new choice for digital rgb full color
led strip and pixel module light.which is lower voltage drop and
high brightness,and the controller system
Dimension:
5000*12*2.5mm (non-waterproof)
5000*12*3.5mm (IP65 waterproof)
5000*12*4mm (IP67/68 waterproof)
Features:
Connecting Diagram:
More options: APA107 5050 30led/m,APA107 5050 72led/m,APA107 5050
144led/m.
Even APA107 WWA digital white 1800-7000K,
APA107 digital Pure white(warm white,nature white,and white)
APA107RGBW 4CH addressable RGBW 4in1 led strip.
Safety Information
1. The SMD light ribbon itself and all its components may not be
mechanically stressed. Assembly must not damage or destroy
conducting paths on the circuit board.
2. Installation of LED light ribbon (with power supplies) needs to
be comply with all applicable electrical and safety standards. Only
qualified personnel should be allowed to perform installations.
Correct electrical polarity needs to be observed. Wrong polarity
may destroy the ribbon.
3. Parallel connection is highly recommended as safe electrical
operation mode.
4. Serial connection is not recommended. Unbalanced voltage drop
can cause hazardous overload and damage the ribbon.
5. Please ensure that the power supply is of adequate power to
operate the total load.
6. When mounting on metallic or otherwise conductive surfaces,
there needs to be an electrical insulated points between ribbon and
the mounting surface.
7. Please pay attention to standard ESD precautions when installing
the ribbon.
Absolute Maximum Rating at TA=25°C | |||||
Parameter | Symbol | Absolute Maximum Rating | Unit | ||
ATA-NF60 | |||||
Forward Current | IF | 2000 | mA | ||
Forward Voltage | VF | DC 12 | V | ||
Electrostatic Discharge | ESD | 400 | V | ||
Operating Temperature | Topr | -25~+60 | °C | ||
StorageTemperature | Tstg | -40~+80 | °C |
Applications
Indoor and outdoor decoration lightings.
Idea for in advertisement and cabaret, large scale backlight,
cabinet, furniture, landscape outlines
Edge-lighting of transparent or diffused materials, to couple light
into transparent or diffused glass
Bridge edge lighting
Window display lighting
Car and motorcycle decorative lighting
Path & Building contour decorative lighting
Emergency hallway lighting / rescue signs / advertising signs /
light boxes
Architectural decorative lighting, villa, restaurant, hotel,
meeting room, show room, shop, counter, etc
Festival lighting, General lighting, Task lighting, Household
appliances, Architectural lighting, Decorative / pathway lighting,
Street lighting
User Manual:
Switch off power of the mains supply or respectively of the
connection lead before doing any works.
The complete installation must be done by an electrical expert who
is familiar with the valid directives.
Quaity Control:
Stability TEST: make sure 100% of the lamps be aging test at least
48hours
Lighting TEST: make sure 100% of the lamps be lighted before
packing
Drop TEST: make sure every single light have been well protected by
box
Contact:
Peony Jin
Mobile: 0086-180 0253 2737
Please feel free to send us your inquiry, We are at your service
any time!