CK45 20MnV6 Chrome Steel Rod Metric Hydraulic Chrome Bar

CK45 20MnV6 Chrome Steel Rod Metric Hydraulic Chrome Bar

Introduction of Chrome Steel Rod

The hardness test of chrome-plated rods should use different hardness testers according to the size of the part, the base material, the thickness of the coating, the diameter of the indentation, and the size of the load. When measuring the hardness of the coating, a Vickers micro-hardness tester is often used, and a load of 5g to 200g can be added according to the thickness to make the indentation depth reach 1/7 to 1/10 of the thickness of the coating. When the thickened chrome plating layer is greater than 100μm, it can be tested by Rockwell hardness tester.
The wear resistance is usually measured by the thickness reduction method, mass loss method, volume wear method, grinding medium consumption method, cutting thickness time method, radioisotope method, etc. The test shows that the Vickers hardness of the chromium layer in the chrome-plated rod is 7355MPa-7845MPa, which has a relatively high wear resistance. The thickness of the chrome plating layer also has a certain relationship with the wear resistance and also has an impact on the service life.

Parameters of Chrome Steel Rod

technical standard:

Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ￠3~￠120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303, SUS316, etc.

Luoyang Super Foliage Trading Company is a factory-based company where the original factory founded in 1993. In order to provide better services to customers, the new trading branch was formed in 2017. We are specializing in the products of cast iron, ductile iron, steel casting and nonferrous parts. It includes 10kg to over 10 tons investment casting and large casting partsctile .

Because of the factory background, we understand what the customer needs

we have better understanding and communication between customers and suppliers. Up to now, there are about over 10 best factories that work closely with us.