Single Modules High Power Inverter , Relay Dry Contact 48v Dc To Ac Converter

Brand Name:TBB
Certification:CE,ISO9000
Model Number:TM251SX4
Minimum Order Quantity:1piece
Delivery Time:1-3days depends on batch order qty
Payment Terms:T/T
Contact Now

Add to Cart

Active Member
Location: Xiamen Fujian China
Address: #15 ShiShan Road, Haicang District, Xiamen China 361027
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

48Vdc input 220Vac/50Hz 4Kva Modular Inverter system high frequency Inverter


HTM250 is a inverter system integrating TM250 inverter module and TJ10 module. It is a truly redundant system offering functions of pure sine wave inverter, static transfer switch and monitor. Single modules are hot plug design which make the maintenance an easy job without interruption to your critical load.

  • LCD display with history record
  • RS485 or RS232 communication port
  • Relay dry contact
  • Auxiliary contact x 16
  • Built in SNMP card - optional
  • Working mode selectable (AC priority or DC priority )
  • Built in static transfer switch with transfer time 4m
  • N+1 redundant configuration
  • Active current sharing technology
  • Pure Sine Wave, with THD<3%
  • Hot plug in technology
  • DC-AC isolation improving system security
  • Excellent dynamic responses
  • Max efficiency up to 89%
  • Complete protection

Location

Please install the equipment in a location of Dry, Clean, Cool with good ventilation.

  • Working temperature: -10℃-40℃ (de-rating above 40C)
  • Storage temperature: -40℃-85℃
  • Relative Humidity: 0%-95%,non-condensing
  • Cooling: forced air
  • Vertical angle:No vibration and hanging angle less than 5 degree

Monitor



Inverter Module


AC Input setting
DC Input Setting
Bypass Setting
Inverter Output Setting
Module setting : you can choose to Disable/Enable the modules
Alarm Setting : set auxiliary contacts, you can choose to Disable/Enable the contact
Clock Setting : set the system clock
Operation mode :Please set the operation mode at rear panel. Default setting was DC priority

Number of Modules:
The default setting of each sub-rack system will be done at factory according to initial order placed. In case you want to add or remove modules, you need to adjust the system setting in order to perform proper system monitoring and system overload protection.

Specification

ModelTM251TM252TM253
Electrical 
Nominal DC input24 or 48Vdc48VDC
DC operating rangeRefer to 2.3 on Page 9
Output power1Kva1.5Kva2Kva
Wave formPure sine wave
Power factor0.8
Norminal output110Vac 115Vac 120Vac 127Vac 220Vac 230Vac 240Vac (±2%)220Vac 230Vac 240Vac (±2%)
Output frequency50/60Hz ± 1%
THD<3% liner load
<5% non-liner load
Crest factor3:1
EfficiencyMax 85% / 87%
Overload150% 10s
125% 1min
Dynamic response time< 20ms
Others
Operating Temp.Full load, -10℃ - 40℃
Isolation1500Vrms
SafetyEN60950-1
EmmissionEN55022
ImmunityEN55022
ElectricalSafety & Environment
ModelTM251,TM252,TM253Operating Temp.: -10C - 40C (de-rating above 40C)
DC InputStorage Temp.: -40C - 85C
Nominal Voltage24VDC, 48VDC, 110VDC, 220VDC, 240VDCIsolationAC–DC : 2000Vrms
Operating rangeRefer to 2.3 on Page 9DC-ground : 2000Vrms
AC OutputAC-ground : 2000Vrms
Output power1KVA, 1.5KVA,2KVA
Max power24VDC: 1KVA 
Others: 2KVA
Wave formPure sine waveDisplay
Power factor0.8
Nominal output110/120VAC or 220/230/240VACLED IndicatorRunning
Voltage variationMax ± 2%Failure
Output frequency50/60Hz ± 0.1%Load Percentage
THD<3% liner load
<5% non-liner load
Crest factor3:01
EfficiencyMax 88%
Overload150% 10secs
125% 10mins
Dynamic response time< 20ms






















China Single Modules High Power Inverter , Relay Dry Contact 48v Dc To Ac Converter supplier

Single Modules High Power Inverter , Relay Dry Contact 48v Dc To Ac Converter

Inquiry Cart 0