

Add to Cart
DPSS Nd:YAG Lasers Economically Priced KDP Pockel Cell Low Repetition Rate
Products Description:
DKDP is deuterated KDP (potassium dihydrogen phosphate) crystal,
due to the use of deuterium replaced the hydrogen in the crystal,
its 1064nm near the absorption peak deviation, making it more
suitable than ordinary KDP in the application of neodymium laser
laser deuterium, The DKDP half-wave voltage than the normal KDP has
greatly reduced; its effective non-linear optical coefficient than
the average KDP high. The phase transition temperature of DKDP
crystal is decreased with the increase of deuterium content. For
example, when the deuterium content is 99.8% and the phase
transition temperature is only 2l ℃, the phase transition
temperature is improved when the deuterium content is decreased,
but the tetragonal phase DKDP Crystal performance is directly
related to the deuterium content, deuterium content is higher, the
better the crystal electro-optical performance, deuterium content
is too low to lose the advantage of deuterated crystals. For these
reasons, DKDP is a very good non-linear optical crystal and
electro-optic crystal, has a high anti-light injury threshold and
high nonlinear coefficient, is widely used in the production of
electro-optical modulation, polarization, Q Devices, commonly used
in the laboratory in the YAG laser. DKDP crystal can be used as an
electro-optical Q switch used in pulsed lasers, it is the use of
its linear electro-optical effect.
With the development of laser technology, DKDP crystal applications
are increasingly widespread, such as electro-optical Q switch,
laser communication and laser display in the vertical modulator and
high-speed photography shutter and so on use DKDP crystal. So DKDP
crystal in these high-tech areas accounted for an important
position. DKDP crystal is the most important application of its
electro-optical performance applications, that is used as a light
modulator.
The vertical half-wave voltage of the DKDP crystal is about 3400 V
(1064 nm) and the light damage threshold is about 500 MW / cm2,
1064 nm, 10 ns, 10 Hz. DKDP crystal polished surface easy
deliquescence, it should be sealed, dry environment.
Advantages:
Sample: