Add to Cart
Pet Treats Injected Molding Machine is special machinery for
producing pet snacks. With such machine, various shapes can be
made, such as hedgehog, crocodile, dog, bone, pork ears, barrel,
etc.
The shapes of pet treats are very lovely and it is a ideal
encouragement to dogs and cats while they learn a new action or do
well in some exercises and games. Also, we can provide different
recipes to meet various market demands.
Pet treats injection machine can use the granular material made by
the extruder to produce the pet chews. Through high temperature and
high pressure, the pet chews molding machine will mold different
shapes.Such as bone, toothbrush, Mace, hedgehog, crocodile, dog,
pork ears, barrel and so on.The pet chews is a kind of pet toys or
pet food. There are many shapes of the pet chews, such as bone,
ball, ring, stick, shoes and particle.The pet chews are
high-protein and nutritional meat for dogs to eat.
a. Raw Materials: adopts corn flour, fish meal as raw materials
b. Products: different shapes are made by adjusting the dies from extruder
c. Flow chart:
Mixing system---Extrusion system---Injection system---Molding system---Packing system
d. Voltage : Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers` Local voltage according to different countries
The DM “ADvanced” Series of machines offers even greater high-speed
performance and increased precision, made possible by the
industry's highest-speed servo control circuit.
This advanced technology, has been accumulated over many years and
results in injection molding expertise that is the envy of the
industry.
Faster and more accurate, the DM Series achieves the highest levels
of productivity and reliability.
An industry pioneer, Smart Machinery has extensive experience in
manufacturing large electric molding machines.
The newly released, second-generation large electric servo drive
molding machine promises to deliver measurable improvements in
productivity, quality, and economy.
This latest improvement retains our time proven toggle clamping
unit, which for many years has delivered "faster cycle times" and
"unparalleled energy savings."
SMART has produced a super-advanced all-electric vertical type
injection molding machine - it is faster, more precise, and more
compact.
The DM series machines have been evolving to mach the needs of
today and beyond: They display high productivity on in-line
assembly.
Using the advanced technologies that have been fostered for many
years and are unique to SMART, we have achieved high-precision
injection molding.
Technical Parameter
1. It comes with user-friendly microprocessor controller with these
following features;
2. Dust, oil proof and colorful touch switch control panel.
3. El display of pressure, speed, time and distance for each
motion.
4. Equipped with 4 stages injection, 3 stages holding pressure and
3 stages back pressure.
5. PID barrel temperature control: temperature abnormal &
electrical wire disconnection alarm.
6. SSR-solid state temperature controller.
7. Screw cold start protection.
8. Abnormal shot detection.
9. Output quantity and packaging quantity preset.
10. Clamping, injection and ejection (option), and carriage action
(option) by linear potentiometer.
Item | Name of item | Unit | DM268B-I |
Injection Unit | Screw Diameter | mm | 55 |
Screw L/D Ratio | Ratio | 20 | |
Injection Volume (Theoretical) | cm | 601 | |
Injection Weight (PS) | g | 548 | |
Injection Pressure | Mpa | 185.1 | |
Injection Rate into Air | g/s | 223.7/276.1 | |
Injection Stroke | mm | 256 | |
Injection Speed | Mm/s | 95/116 | |
Screw Speed | rpm | 201/246 | |
Clamping Unit | Clamping Force | KN | 2600 |
Clamping Stroke | mm | 550 | |
Space Between Tie-bars | mm×mm | 580 x 580 | |
Max. Mould Height | mm | 600 | |
Min. Mould Height | mm | 250 | |
Ejector Stroke | mm | 160 | |
Hydraulic Ejection | KN | 68 | |
Ejector Rob Quantity | pcs | 9 | |
Others | Max. Pump Pressure | Mpa | 17.5 |
Pump Motor Power | kw | 22/30 | |
Heater Power | kw | 15.9 | |
Hopper Volume | L | 50 | |
Oil Pump Volume | L | 550 | |
Machine Weight | t | 8.5 | |
Mould Positioning Ring Diam | mm | 160 | |
Sphere Radius | mm | SR10 | |
Machine Dimension | m x m x m | 5.82 x 2 x 2 |
>
Any interest for this dog treats injection molding machine, please be free to contact us for best quotation!