Three Layer 16mm - 160mm PPR Pipe Production Line 380V 50Hz 3 Phase Voltage

Three layer 16-160mm PPR Co-extrusion Composite pipe extrusion line

Specification:

The production process of the PP-R pipe is an extrusion molding process. First, the PP-R raw material in the hopper enters the extruder by its own weight, and is heated and extruded in the extruder barrel, and fully plasticized from the extruder port. The die is extruded and enters the setting table. After the shaping, the pipe is passed through the tractor and cut by the cutting machine. The pipe is cut by the cutting machine and the pipe is inspected and put into storage. The corresponding fittings are produced by injection molding.
Pipe production process: PP-R raw material → vacuum suction feeding → hopper storage → feeding → extrusion molding → cooling setting → traction → cutting → inspection → storage
Pipe production process: PP-R raw material → conveying and feeding → hopper storage → feeding → heating and melting → extrusion molding → cooling and setting → mold opening → inspection → storage.
Pipe extrusion parameters: (1) screw speed 5 ~ 38r / min (2) barrel temperature distribution 1 ~ 2 area 180 ~ 190 ° C 3 ~ 4 area 200 ~ 210 ° C mold temperature 200 ° C traction speed 2 ~ 20m / min pipe fittings Injection parameters: (1) barrel temperature distribution barrel rear 160 ~ 170 ° C barrel middle 200 ~ 230 ° C barrel front 180 ~ 200 ° C (2) nozzle 170 ~ 190 ° C (3) mold 40 ~ 80 ° CPP The defective products produced in the -R pipe production process can be reused after being crushed, which improves the utilization rate of raw materials, reduces production costs, and improves economic efficiency.

Layout:

Raw material+additive→Mixer→Auto Feeder→Hopper dryer→Single screw Extruder→-Moulds→Vacuum calibration tank→Spray Cooling Tank→Haul-off Unit→Cutting Unit→Stacker

Details specification pictures of PPR pipe production line by BEISU Machinery:

Traditional extruder:

The use of a smooth barrel provides limited friction, resulting in a significant reduction in the solids delivery efficiency of the extruder, resulting in lower yields for conventional smooth extruders and more difficult for extrusion of materials with high viscosity and low coefficient of friction. This greatly limits the application of single screw extruders.

IKV extruder with slotting in the feed section:

The groove is formed on the inner surface of the barrel feeding section, which helps to improve the friction coefficient between the plastic particles and the inner surface of the barrel, and hinders the plastic particles from sliding axially, thereby improving the solid conveying efficiency and finally greatly increasing the output. According to the different direction of the groove, it is divided into a straight groove and a spiral groove.

Main technical parameter:

BEISU Machinery:

BEISU machinery and equipment recommendation: PVC/PE/PP pipe production line, PVC/PE wood plastic production line, PVC profile/profile production line, PVC/PP/PE/ABS sheet/sheet production line, PVC edge band production line and mill, High-speed mixer , crusher, sharpener, shredder, tractor, winder, cutting machine and other plastic auxiliary machinery.

BEISU Machinery is a technical manufacturing plant specializing in the manufacture of plastic recycling、granulation、 shredding、crushing, grinding and mixing. The main equipment includes plastic extruder, plastic granulator, plastic shredder, plastic crusher, plastic pulverizer, plastic mixing equipment, plastic feeding system and other plastic extrusion recycling production equipment. Provide complete turnkey projects for waste plastics, pipes, profiles, plates, wood-plastic, rotational molding, dip-molding, color masterbatch, rubber, aluminum-plastic and other applications.

At present, the "BEISU" machinery brand has covered the world such as Thailand, the United States, Saudi Arabia, Bangladesh, Pakistan, the United Kingdom, Chile, Poland, India, Mexico, Russia, Nepal and so on.

Why choose BEISU Machinery:
A1: Plant construction, renovation plan, pipeline laying plan in the plant, construction plan of circulating cooling pool

A2: Supply of raw materials, transformers, air compressors and other procurement plans

A3: Provide relevant raw material specific formula, high quality raw material suppliers, raw material cost accounting

A4: Installation equipment, commissioning equipment, training staff, and provide technical support throughout the year

A5: BEISU company has a plastics industry engineering alliance nationwide, in the case of distance, can provide relevant talents in your company year-round work, as a technology backing