Name: Load 1000t Q235 Self Loading Motorised Trolleys Carts
Brand: BEFANBY
Price: 1 USD

China Categories

Home Products Suppliers Selling leads

English

Home /Products /Service Equipment /Warehousing & Supermarket Supplies /Shopping Trolleys & Carts /

Load 1000t Q235 Self Loading Motorised Trolleys Carts

Brand Name:BEFANBY

Certification:CE,SGS,ISO9001

Model Number:BWP

Minimum Order Quantity:1 set/sets

Delivery Time:40-50 days as usual delivery,30-40days for urgent delivery

Payment Terms:L/C, T/T, Western Union

Contact Now

Add to Cart

Xinxiang Hundred Percent Electrical and Mechanical Co.,Ltd

Verified Supplier

Location: Xinxiang Henan China

Address: Yulin Town, Yanjin County, Xinxiang City, Henan Province, China

Supplier`s last login times: within 48 hours

View Contact Details

Product Details Company Profile

Product Details

Self loading motorized pipe cart With I Beam Welded 6-7 Hours Working Time

Fo the self loading motorized pipe cart with i beam welded 6-7 hours working time, it is dangerous if transpoting by crane, and the transpoting route is limited, but BEFANBY manufacture the motorized pipe cart could overcome the shortage with unlimited transporting route. which is maintenance free battery powered so that it can reduce the maintenance cost. PU wheel (Solid Tyre) installed so that it can running on the ground to reduce the repair for the ground.

Features

-- Great maneouvrability in small spaces.

-- Suitable for rough, dusty and uneven surfaces.

-- Remote controller incorporated. Easy and intuitive to drive.

-- Environmental protection

-- Sound& light alarm, buffer, dead man stop, E-stop, etc, some safe devices are installed on the steerable transfer car to promise that the trackless transfer cart work safely.

-- 8 hours charging time

-- Intelligent charger to prolong the battery life.

-- Low power alarm device

Parts Of self loading motorized pipe cart with i beam welded 6-7 hours working time

1) The frame adopts the frame structure. It is made of I-beam welded into a frame, in which the longitudinal beam, the cross beam and the countertop are paved with steel plates.

2) Transmission system of self loading pipe cart:
(1) The reducer of the transmission is a three-in-one reducer of the motorized transfer cart. The output shaft, that is, the axle of the drive wheel and the main wheel pair form a transmission assembly, which facilitates the assembly assembly and disassembly and inspection.
(2) The accuracy grade of gear reducer of gearbox conforms to grade 8-8-7 of GB10096. Tooth surface hardness: the pinion gear is not lower than 240HB, and the large gear is not lower than 180HB. Tooth surface roughness: When the normal modulus m is less than or equal to 8 mm, the surface roughness parameter R is 3.2 μm; when m is greater than 8 mm, the surface roughness parameter R is 6.3 μm. Tooth surface hardness of a pair of meshing gears: the pinion gear is not lower than 240HB; the large gear forgings are not lower than 187HB, and the castings are not lower than 179HB. The tooth has no defects and no weld repair. The assembled reducer is flexible and has no oil leakage. The noise of the reducer is no more than 80dB (A) when it is running.
(3) The noise when the reducer is running is not more than 80 decibels. The advantage of this type of transmission is that there are fewer parts. The decoration is convenient, the starting is easy, the operation is stable, the noise is low, and the whole transmission device can be installed as an assembly underneath. Then push under the frame, screw the eight bolts on both sides and the hanging nuts at the ends.

3) Electrical and electronic control systems of motorized transfer cart:
(1) Manipulation mode The operation of the button switch is carried out by hand, and the forward and backward jog buttons are provided. The main electrical components of the control box are made of well-known brand products.
(2) The on-board control box is located on the side of the flat car and is mounted in a recessed wall.
(3) The main electrical components of the control box are made of well-known brand products, made of steel plate, beautiful and practical, the surface of billet transfer car is sprayed with anti-corrosion treatment, the thickness of the box is not less than 2 mm, the heat sink is good, the door lock is firm and reliable, easy to use. do not interfere.
(4) Each electrical component is firmly installed on the vehicle, and the operation is not loose; the wiring inside the frame is piped, and the pipe is fastened with the pipe clamp; the bending radius of the threading pipe is not less than 1.5 times of the pipe diameter; No joint; use copper core rubber insulated wire; temperature rise of motor and other components does not exceed 80 °C.

Customized manufacture all kinds of transfer cart

Company Profile

Xinxiang Hundred Percent Electrical And Mechanical Co., Ltd.(BEFANBY) is a professional international material handling equipment company integrating R&D, design, production and sales. It has a modern management team, technical team and production technician team.The company was established in September 2003 and is located in Xinxiang, Henan. BEFANBY can not only provide transfer cart quotations, but also provide you with satisfactory handling solutions.

BEFANBY has an annual production capacity of more than 1,500 sets material handling equipment, which can carry 1-1,500 tons of workpieces. With more than 20 years of experience in the design of electric transfer carts, it already has the unique advantages and mature technology of designing and producing heavy-duty AGV and RGV. The main products include AGV (heavy duty), RGV, KPD low-voltage rail type, KPX battery type, KPT towing cable type, KPJ cable reel type, KPC sliding contact line type, BWP trackless type, KP unpowered type, BZP turntable , BWT flatbed trailer and other eleven series. Including conveying, turning, coil, ladle, painting room, sandblasting room, ferry, hydraulic lifting, traction, explosion-proof and high temperature resistant, monorail, generator power, railway maintenance cart, railway and road tractor, locomotive turntable and other hundreds of handling equipment and a variety of transfer cart accessories. Among them, the explosion-proof battery electric transfer cart has obtained the national explosion-proof product certification, number: CNV21.0215X.

BEFANBY products are sold to all over the world, such as United States, Canada, Mexico, Germany, Chile, Russia, Saudi Arabia, the United Arab Emirates, Thailand, Singapore, Indonesia, Malaysia, Australia, South Korea and other more than 90 countries and regions.

1. Material handing equipment