Add to Cart
Configuration
A small crane for conenient assembly of the construction lift.
There is the additional 'C' door at the long side of cab for
convenient loading/unloading.
Single or twin lift cabin configuration is available.
The construction rack and pinion elevators are Variable Frequency
Drive (VFD), with low starting current and much less wear and tear,
very smooth starting and stopping.
Manual or Automatic Controls of the lift is optional.
Lighting inside this construction elevator car is LED ceiling lamp
The construction material hoist cage roof doors are equipped with electromechanical interlocking.
Equipped with drop test facility with remote control.
A frequency control unit (FC), with closed-loop, be equipped.
Technical Data
Item & Article No. | SC300BG, MP-B15; SC300/300BG, MP-B16 |
Payload Capacity | 3,000 KG per Cage |
Lifting Speed | 0–60 m/min. |
Max. Lifting Height | 250/400 m* |
Cage Width (Internal) | 1.5 m |
Cage Length (Internal) | 3.2 m |
Cage Height (Internal) | 2.35 m |
Cage Doors | 3 Doors, Entry Door + Exit Door + Side Door |
Motor Control | FC (Frequency Control) |
Engine Power | 3x23 KW per Cage |
Gearbox | Helical Gearbox |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
Rack module | 8 |
* Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. |