

Add to Cart
VFD Drive Rack & Pinion 0-60M/Min Construction Mand and Material Hoist
Construction Material Hoist Design
The modular and standardizing system makes the Kangbo construction
elevators be flexible, efficient, safe, productive, low energy
consumptive and ownership cost, making them the best choice for
both construction and rental companies.
Construction Material Hoist Optional Configuration
Smooth operation, little wear and tear, long work life.
Sliding Contact Line (Integrated Conductive Rail or Busbar) power
supply system made specially for rack and pinion lifts.
An intelligent elevator control system, Multi-function Control
System, with functions of fault detect, display and alarm, and
automatic cage landing/stop and floor selector, is available.
Automatic greasing machine for rack and pinion elevator is
availble.
Construction Material Hoist Technical Data
Item & Article No. | SC200BG, MP-B11; SC200/200BZ, MP-B12 |
Payload Capacity | 2,000 KG per Cage |
Lifting Speed | 0–60 m/min. |
Max. Lifting Height | 250/400 m* |
Cage Width (Internal) | 1.5 m |
Cage Length (Internal) | 3.2 m |
Cage Height (Internal) | 2.35 m |
Cage Doors | Flap Type as Ramp Exit Door is available |
Drive Unit | VFD (Variable Frequency Drive) |
Engine power per cage | 3 x15 KW |
Gearbox | Helical Reducer |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
Rack module | 8 |
* Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. |