

Add to Cart
Split type units mean the main unit and the water tank are separate,and that is easy and flexible to select the place of installation.The capacity of the water tank may be made a choice according to family people.
The material of the water tank is adopted the high quality stainless steel. The resin sponge is filled in the interspace between the inner wall and outer, and that is good heat insulation.
By microcomputer controller and automatic intelligentizing mode,within 24 hours hot water supplying setting,timing ON/OFF designation to set freely.
Air source heat pump water is a green energy product, which is based on Inverse Carnot Principle, it is powered by compressor with about 25% energy consumption , and obtains other 75% heat energy from the air from the process of refrigrant evaporation, so its working efficiecny can maximum reach more than 400%, saving 70% energy consumption comparing with traditional electric heater.
This product is very suitable for warm climate regions such as south-east Asia, South of China, mid east, etc.
Features:
* Economical and high-efficiency: Save average 70% heating cost than electric heaters.
* Water Circulation: Easy installation and acquaintance
* Quiet Running: High-efficiency, low noise rotary compressor, low noise fan, the main unit works at extremely quiet condition.
* Intelligent: Full automatic and intelligent controller, no need any manual operation.
Specification details and price quotation | ||||||||
Product type | Water circulation type air source heat pump water heater (Pressurized) | |||||||
MODEL | S-150L-1HP | S-200L-1HP | S-250L-1.5HP | S-300L-1.5HP | S-400L-2HP | S-500L-2HP | ||
Water Tank | Water Tank Volume | 150 Liters | 200 Liters | 250 Lit res | 300 Lit res | 400 Lit res | 500 Lit res | |
Water Tank Size(MM) | Φ470*1545 | Φ520*1545 | Φ560*1625 | Φ560*1915 | Φ700*1625 | Φ700*1915 | ||
Water Tank outer cover | Colorful shining steel(with anti-corrosive surface treatment, white / golden / Silver available) | |||||||
Water Tank inner cylinder and wall thickness | SUS304/1.0mm | SUS304/1.2mm | SUS304/1.5mm | SUS304/1.5mm | SUS304/1.5mm | SUS304/1.5mm | ||
Heat Exchanger | N/A | |||||||
Insulation | 50mm high density polyurethane | |||||||
Rated Working Pressure | 0.6Mpa | |||||||
Heat Pump Main Unit | Main unit power (HP) | 1Hp | 1Hp | 1.5Hp | 1.5Hp | 2Hp | 2Hp | |
Power consumption | 1KW | 1KW | 1.32KW | 1.32KW | 1.32KW | 1.67KW | ||
Nominal Heating capacity | 3.5KW | 3.5KW | 4.73KW | 4.73KW | 4.73KW | 6.5KW | ||
Fluid pressure reduce and adjustment device | Electronic Expansion Valve | |||||||
Ext. Dimension(mm) | 756 x 260 x 450 | 920 x 280 x 490 | ||||||
Power Supply | AC220V/50hz | |||||||
Refrigerant | R410A/R407C (new environmental refrigerant) | |||||||
20’container loading quantity | 60 sets | 40 sets | 38 sets | 32 sets | 25 sets | 20 sets | ||
Remarks: 1. Above prices are based on FOB + minimum order quantity
of 1x20GP full container, final price will be modified if order
quantity changed more or less. 2. Since USD exchange rate changes often, final price maybe modified according to actual exchange rate of the order confirmation date. |
Successful Applications: