Add to Cart
Ribbon Fiber Optic Cable Types SM OM3 12 Fiber MPO Female To MPO
Female
Description:
SM OM3 Ribbon 12 Fiber 24Fiber MPO Female to MPO Female Fiber Cable
manufactured by ANC International Co., Limited terminated 12F or
24F Senko MPO female connector on both ends of customized ribbon
cable; The single mode MPO and MTP Fiber Cable normally uses an 8
degree APC angle polish to mitigate back reflection as per industry
standards. MPO Connectors have Male and Female Connectors optional.
1pcs Male and 1pc Female connector are required to mate properly.
MPO connectors use a “barrel sleeve” adapter that simply holds one
male and one female MPO “plug” together. The male guide pins fit
into the female holes to ensure precise fiber alignment. Attempting
to mate two female connectors will result in a seemingly secure
connection, but with extremely high loss. Attempting to mate two
male connectors will most likely damage one or both connectors due
to the guide pins clashing.
Features:
SM (9/125 G657A1), MM (50/125 or 62.5/125), OM3, OM4, OM5 fiber
optional;
Female and Male MPO MTP connectors optional
8Fiber, 12Fiber, 24Fiber MPO MTP Connectors optional;
Standard Loss and Low Loss optional
High density connections between network equipment in
telecommunication rooms;
Type A or Type B or Type C optional;
LSZH, OFNR, OFNP Jacket optional;
Easy installation and removal with push-pull latching
Applications:
Telecommunication
Data Network
LAN, FTTX
CATV
Optical Performance:
MPO/MTP | SM Standard | SM Low Loss | MM Standard | MM Low Loss | |
Insertion Loss | Typical | 0.35dB | 0.20dB | 0.35dB | 0.20dB |
Max | 0.75dB | 0.35dB | 0.65dB | 0.35dB | |
Return Loss | APC≧50dB | ≧25dB | ≧35dB | ||
PC≧40dB | |||||
Durability | ≤0.3dB (change 500matings) | ≤0.3dB (change 1000matings) | |||
Exchangeability | ≤0.3dB (Connector randomly) | ||||
Tensile Strength | ≤0.3dB (Max 66N) | ||||
Vibration | ≤0.3dB (10~55Hz) | ||||
Operation Temperature | -40℃ ~ +75℃ |
Interferemeter Test:
MPO/MTP | Dimension MT |
Radius of Curvature | X≧2000mm; Y≧50mm |
Fiber Height | 1000~4000nm |
Endface Angle | X±0.3°; Y±0.3° |
Core Dip | -300nm ~ 300nm |
Choose Your Polarity
Type A - Straight: Straight-through polarity is typically for connecting patch
panels. They are wired in a mirrored configuration, going from Pin
1 on one connector end to Pin 1 on the opposite end, etc.
Type B - Rollover: Rollover polarity is used primarily for connecting to switches
and transceivers in 40Gb applications. In a 12-strand rollover
polarity, the cable is wired from Pin 1 on one connector end to Pin
12 on the opposite end. Then 2 to 11, and so forth.
Type C - Flipped: Pair-Flipped polarity is typically used in cassette-to-cassette
applications. Pin 1 on one end goes to Pin 2 on the opposite end,
and 2 to 1, 3 to 4, 4 to 3, and so on. you can select your desired
polarity before ordering.
Related Product Pictures