Seamless Steel Pipe 12"X0.875" ASTM A355 P91ASTM B36.10 Carbon Alloy Steel Round Pipe

Seamless Steel Pipe 12"X0.875" ASTM A355 P91ASTM B36.10 Carbon Alloy Steel Round Pipe

Introduction

Stainless steel seamless steel pipe is a kind of long steel with hollow section and no joints around. Stainless steel seamless pipe

Features of stainless steel seamless pipe:

First, the thicker the wall thickness of the product is, the more economical and practical it is. The thinner the wall thickness is, the higher the processing cost will be; Secondly, the process of the product determines its limited performance. Generally, the precision of seamless steel pipe is low: uneven wall thickness, low brightness on the inner and outer surfaces of the pipe, high sizing cost, and pockmarks and black spots on the inner and outer surfaces are not easy to remove; Third, its detection and shaping must be handled offline. Therefore, it shows its advantages in high pressure, high strength and mechanical structure materials.

Duplex stainless steel has about half of ferrite phase and half of austenite phase in its solid solution structure. Generally, the content of small phase should reach 30%. With low C content, Cr content is 18%~28% and Ni content is 3%~10%. Some steels also contain alloy elements such as Mo, Cu, Nb, Ti and N.

Classification of duplex stainless steel:

1. Low alloy type

It indicates the grade (23Cr-4Ni-0.1N). There is no molybdenum in the steel. PREN (pitting resistance equivalent) is 24-25. It can replace AISI304 or 316 for stress corrosion.

2. Alloy

Representative grade (22Cr-5Ni-3Mo-0.15N), PREN (pitting resistance equivalent) is AISI 316L and the corrosion resistance between 6% Mo N austenitic stainless steel is 32-33.

3. High alloy type

It generally contains 25% Cr, molybdenum and nitrogen, copper and tungsten. Standard grade (25Cr-6Ni-3Mo-2Cu-0.2N), PREN (pitting equivalent) is 38-39, and the corrosion resistance of this steel is higher than that of duplex stainless steel with 22% Cr.

4. Super duplex stainless steel

The standard grade (25Cr-7Ni-3.7Mo-0.3N) and PREN (pitting resistance equivalent) are greater than 40, which are suitable for demanding medium conditions and have good corrosion resistance and mechanical properties, comparable to super austenitic stainless steel.

A335P91 is a material of high pressure and high temperature resistant steel. P91 bars, plates, pipes, pipe fittings, p91 is generally called A355P91, which is equivalent to the national standard 10Cr9Mo1VNb. It is a material of high pressure and high temperature resistant steel pipes. The American standard is ASME SA-335/SA335M. The tensile strength is ≥ 585 (MPa), the yield strength is ≥ 415 (MPa), and the elongation is ≥ 20 (%). P91 is characterized by the thinning of the pipe wall thickness. In terms of materials, the amount of materials used is reduced by more than 40% compared with other steels, and the cost of materials and installation is saved by more than 30%. As the self weight of P91 pipe is reduced, the load of supports and hangers is also relatively reduced, which is convenient to support and lift, and convenient to design and install.

Q1: Are you trading company or manufacturer ?

A: We are factory.

Q2: How long is the delivery ?

A: 15-30 working days

Q3: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

If you want to get more information of the products, send me e-mail or by skype, whatsapp etc.

If any questions,you can call me mobile phone at any times:0086-15710108231

TOBO GROUP sales head offce in Shanghai.

We are one of the Professional manufacturers Exporter Pipeline products in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area of 6,8,000square meters, existing 260 workers and 45 technicians.

We have five branch factories which can supply the best quality pipes, tubes, fittings flanges and related accessories. Now, it owns a number of advanced pipe production equipments, metal, forging, machining, cold forming, hot extrusion, such as heat treatment process, producing 60, 000 tons of pipe fittings. Company with a variety of detection devices, such as nondestructive testing, chemical analysis, metallographic examination, physical experiments. The technical is very strength, our main products contain fittingsforged socket welding fittings and threaded fittings, pipe weld and the materials of the products contain stainless steel ,duplex-stainless steel alloy steel.

In addition, we are authorized by more than 120 top-class mills from South Korea,Japan and China like JFE,SUMITOMO,POSCO,BAOSTEEL, TISCO,LISCO,.TPCO,HENGYANG VALIN and so on .

Our main products as follows:

• Stainless steel pipe & tube

(seamless pipe / welded pipe / square pipe / rectangular tube,duplex stainless / inconel tube)

• Carbon / alloy steel pipe & tube

(seamless pipe / ERW / SSAW / LSAW / UOE / hollow section pipe / Galvanized Pipe)

• Tubing and casting

(line pipe,water pipeline,gas pipeline,oil pipeline)

• Special steel tube

(copper tube/titanium tube/aluminium tube/nickel alloy )

• steel bar

(round bar/angle steel /flat steel/channel steel/steel wire)

• Pipe Fittings

(eblows, equal / reducing tees, concentric/eccentric reducers, caps, crosses, bends, dish end/end cup, stub ends, unions, couplings / hex couplings, swage nipples , nipples, hex. plug, sockolet, weldolet, thredolet, etc)

• Flange

(DIN flange/ AISI flange/blind flange/welding flange/stainless flange/slip on flange)

• steel sheet / coil

(stainless steel/carbon steel/alloy steel/galvanized steel/aluminium )

• Valve

(ball valve/gate valve/butterfly valve/globe valve/swing check valve/ check valve)

In order to comply with the global modernization services development trends and eliminating the varieties distress of the global enterprise‘s purchase in the consumables.. We coordinate the pressure pipe manufacturer which with the scale of production,quality control and high cost performance (has passed ISO 9001 quality series attestation, ccs, DNV,PED/97/23/EC,AD2000-WO,special equipment manufacturing license,ASME-SA182.through a variety of effective assort mechanism to make up the shortage of supply and Post-processing of VAT enterprise, and to supply high quality pipe fittings, because of the superior quality and good service, we have established long term business cooperation with more than 60 countries and areas,which covers Europe, Africa, South America, North America, Middle East, Taiwan and South East Asia and so on.

With many years effort and support from our valuable customers, these products have obtained a big market share in the world.

Our business principle is "Superior quality, Competitive price, Timely delivery and Considerate service " Standing to the principle of “Enterprises focus on the core business”, TOBO will actively promotes the globalization of business strategy approach, using advanced supply chain management technology to service for clients with higher quality and more competitiveness ‘ s products. At the same time, we sincerely reply your inquiry, honesty waiting for your visiting and wish to have cooperation with you at the any time. We welcome all the customers to contact us for more information. We assure you, with our technical knowledge and experience, our company will be one of your Stable, Continuate business parters in China.

info@tobo-group.com