Product Details
Image And Optical System Cleaning System GKG Special Adjustment
Jacking Platform Automatic Solder Paste Printer
Introduction
GLE Automatic solder paste printing machine is a high-end machine
for SMT large-scale applications. The width of Gt-S is only 2830mm.
It can perfectly meet the printing process requirements of
01005,0.3pitch and other fine spacing, it's high precision and high
speed.
Features
1, GKG special adjustment jacking platform. Stable and easy to
adjust, it can quicklyadjust the pin jacking height of PCB with
different thickness.
2, Cleaning system: GKG cleaning system equipped with three
cleaning methods: dry cleaning, wet cleaning, vacuum. which can be
combined to use. It can also be cleaned by manual if customer do not need to
use automatic cleaning to reduce the cleaning time and improve
production efficiency. The newly wiping system ensures full contact
with the stencil, increased vacuum suction can effectively
eliminate the remaining paste in the mesh, which can achieve effective automatic cleaning
function.CCD part and c leaning system is separated, when CCD
working, CCD part independently move to reduce the servo motor load and improve the
machine speed and accuracy. 3, Image and optical system. Using uniform ring light and high
brightness coaxial light, with promise brightness adjustment
function, then all types of Mark points can be well recognized
(Including the rugged mark points), applicable for tin plating,
coppering, gold plating,tin spraying, FPC and other types PCB with
of different colors. With GKG patent mathematical model,able to
ensure high accuracy.
4, High adaptability steel mesh frame clamping system. Able to
print all kinds of size screen frames, and quickly change modularproduction line.
5, Using Windows XP/win7 operation interface, with good man-machine
dialogue function, and easy for operator quickly familiar with the
operation especially when doing navigation effect of programming
file. easy to switch Chinese/English interface, with operation log,
fault record / fault self-diagnosis / fault analysis prompt / light
alarm and other functions.
6, New Pattern guide rail ban detachable, programmable flexible
side clamp, specific to FPC, PCB warpage, perform a unique clamping
plate device. Through software programming can automatically
stretch out and draw back unaffected PCB pickness.
Specification
Model | GLE |
Max PCB Size | 510x510mm |
Min PCB size | 50x50mm |
PCB thickness | 0.4-6mm |
Max board weight | 5kg |
Transport height | 900±40mm |
Board edge gap | 2.5mm |
Board height | 23mm |
Transport direction | L-R,R-L |
Transport speed | max 1500mm/s, program control |
Transport method | One stage |
WIdth adjustment | automatic |
I/O interface | SMEMA |
PCB positioning (support method) | Magnetic pin/support block/up-down table |
PCB clamping system | Patented over the top clamping |
Side clamping |
Adsorption function |
Print snap-off | 0-20mm |
Print mode | one/twice |
Print Speed | 10-200mm/sec |
Print Mode | One /Twice |
Squeegee Type | Rubber /steel Squeegee Blade(Angle 45°/55°/60°) |
Print pressure | 0.5-10kg |
Template fram size | 470*370mm~737*737mm |
Cleaning System | Droops of rain type cleaning system |
Reinforced vacuum absorption |
Dry, wet vacuum three modes |
CCD FOV | 10x8mm |
Fiducial mark types | Standard Fiducial mark shape |
Pad |
Hole |
Camera system | Look up/down optics structure |
CCD digital camera |
Geometry pattern match |
Machine Performance
Model | GLE |
Repeat position accuracy | ±12.5um@6,CPK≥2.0 |
Print accuracy | ±20um@6,CPK≥2.0 |
Print cycle time | <7.5 sec |
Based on the third party test system(CTQ) verify the actual solder
paste printing position repeat precision |
Whole Machine Specification
Power supply | AC:220±10%,50/60HZ, 3.0KW |
Air pressure | 4~6 kgf/cm² |
Air consumption | around 5L/min |
Operating temperature | -20℃~+45℃ |
Operating humidity | 30%~60% |
Machine Dimensions(without tower light) | 1240(L) x 1410(W) x 1500 (H)mm |
Machine Weight | Approx: around 1100Kg |
About Packaging
Company Profile
Shenzhen HanSome Technology Co.,Ltd(HSTECH)was estabilished in 2012
by prefessional and experienced engineer who wroked many years in
EMS company,we specilized in PCB handling equipments at first, then
we develop the PCB depaneling machine and SMT cleaning machine.
HSTECH not only have professional technical team for R&D,but
also have a outgoing and experienced marketing team for research
and develop, grasps products developing directions, updates the
products and technics to meet the continue changing demands. In the
past years,we have been always keep innovating and exploing to make
cost-efficient products to help our customers saving cost and
labor, improving the production efficiency at the same time.
HSTECH set the goal for "High quality and Smart”, that based on the
concept of "Quality-Oriented and Customer-orented", and combined
the industry feature, smart technology persuit for the smart
factory.As for the after-sale service, we insist on
"responsibility", we will take reaction at the first when we got
quality feedbacks,and service our customers all the time.