PVC UPVC CPVC Plastic Pipe Production Line
The PVC Pipe production line is mainly used in the area of
agricultural water supply system, architectural water supply
system(water supply and drainage pipe), pavement of cables and as
well as different diameter and thickness of PVC Pipes. The complete
PVC Pipe production line is composed by conical twin screw
extruder, pipe extrusion mold, vacuum calibration tank, haul off
machine, cutter and stacker, belling machine (flaring machine). The
main extruder and haul off we adopts ABB inverter, vacuum pump and
motors adopt high quality famous brand. Haul off machine has two
claws, three claws, four claws, six claws and eight claws accord to
different pipe diameters. For pipe cutting machine has saw and
planetary cutting type, which additionally attached with the meter
counter and intensifying device. The production line is easily
installation and operation, simple maintenance with reliable
Material → mixer → forced Feeding → conical double screw extruder →
mould&calibrator → vacuum spay cooling tank → printer→ haul-off
→ cutter → stacker
The whole production line
This machine is equipped with a quantitative feeding device, so
that the extrusion amount and the feeding amount can be matched to
ensure the stable extrusion of the product.
After compaction, melting, mixing and homogenization of PVC, the
subsequent material is pushed to the die by the screw.The extrusion
die is the most important part of tube forming.
Used for shaping and cooling of pipes, it is equipped with a vacuum
system,water circulation system, as well as front and rear moving
device and left and right, height adjustment manual device,
stainless steel box, circulating water spray cooling.
lt is used to continuously and automatically lead out the cooled
and hardened pipes from the machine head, and the speed is
controlled by frequency conversion.
After belling controlled by encoder according to the required
length, automatic cutting is carried out, the stacker is turned
over with a delay, pipes are cut smoothly without scraps and dust.
Accept finished products and automatically turn over.
The automatic pipe flaring machine can cooperate with the pipe
production line to expand the pipe online or expand the pipe
separately. The flaring pipe is heated by an oven, and the Omron
temperature control is used for precise temperature control.
- Complete line solution from A to Z, including raw materials.
- Suitable to make U-PVC, C-PVC, M-PVC pipe extrusion, PVC Pipe
- Optional to adopt conical twin screw extruder and parallel with
twin screw extruder.
- Supply formula for the plastic PVC pipe project.
- Life long after sale service and technology support.
- Pipe Diameter range: 10-800mm.
- Best Economic Advice on the extrusion production line to save the
|Extruder power (kw)
|Max lineal speed (m/min)
|Max capacity (kg/h)
PVC is currently used in a wide spectrum of piping applications,
all helping to meet modern Infrastructure needs.
To help customers do market research, make project planning, and
production line matched requirements analysis.
To provide installation and test for the machine.
To provide formulas and technology of relevant products.
To provide information on chemical material manufactories.
To provide technical training for clients' employees.
To direct technology aspect of relevant use according to customers'