Add to Cart
The plastic extrusion process begins when PA compounds in the form granules are continuously fed through a hopper into the extruder. The screw gradually moves these materials along the barrel, and in the process, enough heat is generated to melt the PA compounds.
Production Speed | Around 8-14cm/min |
Strip Shape | All kinds of shape |
Raw Material | PA6.6 granules reinforced by 25% glass fiber |
Cooling | Water Cooling |
Usage | Produce thermal break strip |
Type | Plastic extrusion machine |
Winding Machine | Available |
Cutting Machine | Available |
Worktable | Available |
Processing Technique
PA66GF25 Polyamide Profiles Extrusion Machine Including
|
|
|
|
|
|
|
|
|
1. The barrel is heated by stainless steel heater, withstand voltage 400V
2. The professional dryer makes raw material convection with hot air uniformly, and the drying uniformity is good. Its thermal insulation structure prevents heat dissipation and promotes energy saving.
3. Special new screw make sure the machine has low energy consumption, good plasticizing ability and stable extrusion flow.
4. The extruder uses high-quality carbide twin-screws to ensure high plasticization of PA66GF25 granules
5. One temperature control zone controlled by one table, and the temperature accuracy can be controlled at ±1℃.
One to one consulting service
Experienced senior engineer to discuss technical data, designed drawing
Perfect arrangement of sea or air transport
Overseas aftersales service
Professional engineers team
Welcomed to visit the factory at any time
Choosing Polywell means choosing the certainty of a reliable partner, able to team up and offer daily support. We are where you need us, whenever you need us.
30-38 working days after receiving the deposit
50% T/T before production, 50%T/T before shipment
Please feel free to contact us if you have any questions.
Camille
E-mail: camille@szpolywell.cn
Tel:86-13584481777
Wechat: Camille_4790
Address: Zhangjiagang City, Jiangsu Province, China