Hollow Template Plastic Construction Formwork Machine For Wall Shuttering Scaffolding

Hollow plastic template for concrete wall shuttering/scaffolding formwork machinery

Advantages of pp Formwork

1. Manytimes reuse
Reuse 50-60 times ,6-8 times than plywood , totaly save cost more than 50%.

2. Leight weight
Average weight 8.3kg/square meter ,make the work easily installation quickly ,save labor cost and shorten the period of project .

3. High strength,hardness,impact resistance-small check design
Small check design increase the srength , hardness and impact of resistance ,reduce the weight.Shore Hardness(HD) is 70 .Impact strength:Lateral pressure is 41.5KJ/m2 ,Vertical pressure is 85KJ/m2.

4. Easy demould and the best effect of casting molding
Smooth and clean surface make the demould easily .No need release agent ,only tapping then the formwork will fall off .And the effect of casting molding is very good .Also this finally shorten the period of project.

Installation instructions:

• 1, Use the hollow building formwork intersecting surface laid with 15 mm thick.

• 2, Wood square of the distance :

  • 1, On the surface of the intersection (spacing: wood square distance according to the thickness of the slab concrete, in general, the thickness of less than 0.15 m floor (spacing is 200 ~ 250 mm.

  • 2,The shear wall (spacing: (spacing according to adjust the spacing, height and thickness of the wall to wall height of 2800 mm, 300 mm thick wall, for example, using the formwork (15 mm thickness spacing is 100 ~ 150 mm, if the shear wall, pillar width more than 1 meter, must add the fixed frame.

  • 3, Die shear wall and column puzzle when leaving no gaps, internal Angle (the bottom of the wall) parts must have wood square, beam, wall, formwork connection.Shear wall made 4 after the mold must be assembled into the whole hoisting, then lay flat, reduce labor intensity, forming effect is good.

Features of plastic construction formwork:

Advantage:

General Operation And Notes Of Instrument For formwork board system :

• Method of use as well as wooden formwork, pvc bridge formwork reinforcement direction with batten direction placed in cross shaped.
• No need to smear the mold release agent before using board formwork.
• When cast-in-place the flat plate, spacing between the keels should be 20 ~ 25 cm, and the spacing between the wall plate and keels hould be 10 ~ 20 cm. ACEMIEN formwork board system don't need releasing agent.
• The seam-line between pvc bridge formwork should be taped.
• The length of nail should not be too long, generally about 30 ~ 35 mm.
• The strength to drive nailsshould be moderate.
• When removing the board formwork, please start from the small part of one end, the support and the plates should be removed at the same time aiming at preventing the template widespread drops, don't let the corner drop on the ground vertically.
• The formwork board system accesses to be mixed used with wood veneer, bamboo veneer and other material plate

FAQ
1. Q: Are you manufacture factory or a trader?

A: We are an industrial manufacture factory of plastic extrusion machinery for years, which locates in Zhangjiagang city, China.

2. Q: What's your payment term:

A:T/T 30% in advance & T/T 70% upon sending the copy of Bill of Lading, L/C 100%, or negotiate according to the order status.

3. Q: Can we visit your factory ?

A: Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case

4. Q: How do you make the quotation for clients?

A: The price depends on quality and performance but the clients should be satisfied first.

5.Q: Do you have any after-sale service ?

A: Yes,we have professional after-sale teamwork . any technical question could be solved in 24 hours by our after-sale teamwork.

6. Q: How do you install your equipment in our factory ?

A: We have professional after-sale &installation teamwork, we will arrange our engineer fly to ur factory install and teach ur labor .

Our Packing and Shipping

Our Exhibition

JiangSu Acemien Machinery Co., Ltd. is a brand production enterprise which is the first batch of PVC roofing building materials equipment, PP hollow construction formwork production line in China, which focuses on plastic extrusion equipment and plastic recycling equipment. The company has gathered a number of outstanding talents and formed a high quality scientific research team with the elite of Chinese and young science and technology as the backbone. It has accumulated rich experience in product design and profound theoretical knowledge in the continuous product research and development practice.

Our company concentrate on five series equipment, they are Synthetic resin tile and PVC corrugated tile extrusion equipment; PP hollow construction formwork production line; Artificial marble sheet and profile extrusion equipment; Post recycling and granulation equipment; Conventional extrusion equipment such as pipe/profile/sheet; Auxiliary equipment such as mixer/crusher/pulverizer.

JiangSu Acemien Machinery has become a large-scale and modern national enterprise in the plastic roofing and building materials industry. The company insists on the business philosophy of "professionalism, integrity, win win and development", and continuously improves technology strength and supporting capabilities. In the era of Internet +, we will keep pace with the times.