Dpack corrugated WJ250-2500-5-layer Corrugated Board Production Line with High Quality Configuration corrugation plant

Brand Name:Dpack
Certification:IOS9001
Model Number:WJ250-2500
Minimum Order Quantity:1 Line
Delivery Time:According to product
Payment Terms:L/C, T/T
Contact Now

Add to Cart

Active Member
Address: Address:NO.252 Guanzhou Road, Dongguang County , Hebei Province ,China
Supplier`s last login times: within 18 hours
Product Details Company Profile
Product Details

WJ250-2500-5-layer corrugated board production line with high speed


ModelWJ250-2500 five-layer corrugated board production line
Design speed250m/min,220m/min for three floors, 200m/min for five floors
Expiry width2500mm
Length of production lineabout 90m (the specific length is subject to the technical drawing)
FluteA,C and B and E flute type (as per the clients’ request)
Steam requirementsSteam capacity 3200Kg/h, maximum pressure:1.6mpa ,commonly used pressure 1.25mpa
Voltage and Current frequency380V, 50Hz,three-phase four-wire system(also as per clients country standard voltage and frequency)
Total power of the equipmentabout kw Common power of equipment: kw
Recommended plant size100 m x 20 m x 9 m (length x width x height)
Equipment directionLeft or right transmission will be according to cilent’s request

Note: The paper which test the speed of production line according to the request, as follows

*Reel–paper grade not less than B.

*The moisture rate of reel paper:11%±1%

*Face paper:140-180g/m2 *inner paper:90-125g/m2 *Corrugated paper:90-125g/m2




NOMachine nameQTYRemarks
1

Hydraulic mill roll stand


5

Full hydraulic control, hydraulic station Taiwan brand,Cog-type top paper chuck and three point brake, RE Italian brand.

2Hydraulic paper rail101 set of hydraulic driven track and trolley (track length is 10 meters according to site requirements), including raw paper centering device

3


4

cassette type single facer

2C/B corrugated roller diameter 360, synchronous belt drive, rubber baffle plate automatic rubber separation (pneumatic motor, encoder), on the rubber part of the cooling system 2 sets, including 2 sets of Lushi fan.2 sets of machine glue circulation.
change system1Including 1 pair of corrugated roller to E watt, a set of roller changing components, 2 roller base storage machines, and 1 electric car.
5Double layer bridge1Double layer bridge, Paper holding department 2 sets, independent transmission, frequency conversion motor. Automatic adjustment according to the speed of single machine to keep synchronization.3 escalators.
6

Pre-heater(inner)

2Preheating cylinder ¢900 mm diameter, electric adjusting preheating area, a safety shield electric synchronous rotation
7

Pre-conditioner(corrugated paper)

2Preheating cylinder ¢900 mm diameter, electric adjusting preheating area, a safety shield electric rotation.
8Triplex pre-heater1"L", preheating cylinder diameter ¢900, with the rotation speed motor drive and paper.
9Duplex gluing machine1Roller type, pneumatic control for lifting.318mm rubber roller with a digital display of rubber quantity. Automatic glue adjustment according to speed. Stainless steel rubber tank. Electrically adjust the gap between the press rollers. The main bearing USES the Japanese NSK brand.
10Double facer1600*18 pieces of automatic deviation correction up and down one set of pneumatic tightening. Press plate 15 group
11Conveyor1Made in China
12Main drive1Independent reducer, drive roller rubber plate imported from Germany
13Electrical system1Schneider, zhengtai brand, Taiwan delta inverter, including control cabinet to the main electric wire
14Steam system1The TLV trap
15Splicer machine5200m/min
16Production management system1
17Bridge tension correction1Mechanical automatic control system guangdong

China Dpack corrugated WJ250-2500-5-layer Corrugated Board Production Line with High Quality Configuration corrugation plant supplier

Dpack corrugated WJ250-2500-5-layer Corrugated Board Production Line with High Quality Configuration corrugation plant

Inquiry Cart 0